Notation

What it means

[range / default/step]

Example: [-9 to +9 / 0 / 0.1 mm step]. The setting can be adjusted in the range ±9, value reset to

+3.0 after an NVRAM reset, and the value can be changed in 0.1 mm steps with each key press.

*

Value stored in NVRAM. After a RAM reset, this default value (factory setting) is restored.

DFU

Denotes "Design or Factory Use". Do not change this value.

Japan only

The feature or item is for Japan only. Do not change this value.

SSP

This denotes a "Special Service Program" mode.

FSP

This denotes a "Factory Service Program" mode.