1001

[Scan Nv Version]

Displays the scanner firmware version stored in NVRAM in a 9-digit format: Func. Name_Model Name_History No.

005

-

*CTL

[- / - / -]

1005

[Erase Margin(Remote scan)]

Creates an erase margin for all edges of the scanned image.

If the machine has scanned the edge of the original, create a margin. This SP is activated only when the machine uses TWAIN scanning.

001

Range from 0 to 5 mm

*CTL

[0 to 5 / 0 / 1 mm / step]

1009

[Remote scan disable]

001

-

*CTL

[0 or 1 / 0 / 1 / step]

0: ON (enabled)

1: OFF (disabled)

This SP switches the TWAIN scanner function on/off. This is one of the scanner application functions.

1010

[Non Display Clear Light PDF]

001

-

*CTL

[0 or 1 / 0 / 1 / step]

0: Display, 1: No display

Display or Non display remote scan.

1011

[Org Count Display]

001

-

*CTL

[0 or 1 / 0 / 1 / step] 0: OFF (no display)

1: ON (count displays)

This SP codes switches the original count display on/off.

1011

[Org Count Display]

001

-

*CTL

[0 or 1 / 0 / 1 / step] 0: OFF (no display)

1: ON (count displays)

This SP codes switches the original count display on/off.

1011

[Org Count Display]

001

-

*CTL

[0 or 1 / 0 / 1 / step] 0: OFF (no display)

1: ON (count displays)

This SP codes switches the original count display on/off.

1012

[User Info Release]

001

-

*CTL

[0 or 1 / 1 / 1 / step]

1: Release

0: Do not release

This SP code sets the machine to release or not release the following items at job end.

 Destination (E-mail/Folder/CS)

 Sender name

 Mail Text

 Subject line

 File name

1012

[User Info Release]

001

-

*CTL

[0 or 1 / 1 / 1 / step]

1: Release

0: Do not release

This SP code sets the machine to release or not release the following items at job end.

 Destination (E-mail/Folder/CS)

 Sender name

 Mail Text

 Subject line

 File name

1012

[User Info Release]

001

-

*CTL

[0 or 1 / 1 / 1 / step]

1: Release

0: Do not release

This SP code sets the machine to release or not release the following items at job end.

 Destination (E-mail/Folder/CS)

 Sender name

 Mail Text

 Subject line

 File name

1013

[Multi Media Function]

002

-

*CTL

[0 or 1 / 1 / 1 / step]

0: Disable

1: Enable

This SP code enables/disables the multi-media function option (USB 2.0/SD Slot) mounted on the front of the machine. Operators can scan documents to either an SD card or a USB memory device inserted into this unit. This SP must be enabled (set to "1") in order for the device to function.

1014

[-]

001

-

*CTL

[0 or 1 / 0 / 1 / step]

0: Disable

1: Enable

Enables / Disables to input password for Scan To Folder.

1041

[Scanner FlairAPI Function Setting]

001

-

*CTL

* see BitSwitch below:

Sets Scanner FlairAPI Function enable / disable.

This SP is set by BitSwitch and needs to reboot the machine after making changes.

bit

Setting

meanings

Description

0

1

bit 0

Start of FlairAPI Server

Off (Do not Start)

On (Start)

Sets whether to start exclusive FlairAPI http server. If it is 0, scanning FlairAPI function and simple UI function will be disabled. The machine installed Android operating panel option, set “1”, others set “0”.

bit 1

Access permission of FlairAPI from outside of the machine

Disabled

Enabled

If it is “0”, accessing is limited from the machine only, such as operating panel, SDK/J, MFP browsers etc… If it is “1”, accessing is allowed from outside of FlairAPI such as PC, Remote UI, IT-Box etc…

bit 2

Reserved

-

-

-

bit 3

Reserved

-

-

-

bit 4

Simple UI Function

Disabled

Enabled

If it is “1”, the machine can be used Scanner Simple UI. If it is “0”, requesting URL of Simple UI returns “404 Not Found”