1001

[Bit Switch]

001

Bit Switch 1

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

No I/O Timeout

Disabled

Enabled

Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting will have no affect. I/O Timeouts will never occur.

bit 4

SD Card Save Mode

Disabled

Enabled

If this bit switch is enabled, print jobs will be saved to the GW SD slot and not output to paper.

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

[RPCS,PCL]: Printable area frame border

Disabled

Enabled

Prints all RPCS and PCL jobs with a border around the printable area.

1001

[Bit Switch]

002

Bit Switch 2

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

Applying a Collate Type

Shift Collate

Normal Collate

A collate type (shift or normal) will be applied to all jobs that do not explicitely define a collate type.

Note: If #5-0 is enabled, this BitSwitch has no effect.

bit 3

[PCL5e/c,PS]: PDL Auto Switching

Enabled

Disabled

Enables/Disables the MFPs ability to change the PDL processor mid-job. Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL switching is disabled, these jobs will not be printed properly.

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

Switch dither

Use normal dither

Use alternative dither

*Please refer to RTB#RD014018

bit 7

DFU

-

-

1001

[Bit Switch]

003

Bit Switch 3

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

[PCL5e/c]: Legacy HP compatibility

Disabled

Enabled

Uses the same left margin as older HP models such as HP4000/HP8000. In other words, the left margin defined in the job (usually "<ESC>*r0A") will be changed to "<ESC>*r1A".

bit 3

DFU

-

-

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

DFU

-

-

1001

[Bit Switch]

004

Bit Switch 4

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

IPDS print-side reversal

Disabled

Enabled

If enabled, the simplex pages of IPDS jobs will be printed on the front side because of printing on the back side of the page. This might reduce printing speed.

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

DFU

-

-

1001

[Bit Switch]

005

Bit Switch 5

0

1

bit 0

Show "Collate Type", "Staple Type" and "Punch Type" buttons on the operation panel.

Disabled

Enabled

If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type from the operation panel. The available Types will depend on the device and configured options.

After enabling this BitSw, the settings will appear under: "User Tools > Printer Features > System"

bit 1

Multiple copies if a paper size or type mismatch occurs

Disabled (single copy)

Enabled (multiple)

If a paper size or type mismatch occurs during the printing of multiple copies, only a single copy is output by default. Using this BitSw, the device can be configured to print all copies even if a paper mismatch occurs.

bit 2

Prevent SDK applications from altering the contents of a job.

Disabled

Enabled

If this BitSw is enabled, SDK applications will not be able to alter print data. This is achieved by preventing SDK applications from accessing a module called the "GPS Filter".

Note: The main purpose of this BitSw is for troubleshooting the effects of SDK applications on data.

bit 3

[PS] PS Criteria

Pattern3

Pattern1

Change the number of PS criterion used by the PS interpereter to determine whether a job is PS data or not.

bit 4

Increase max. number of stored jobs.

Disabled (100)

Enabled (750)

Changes the maximum number of jobs that can be stored on the HDD. The default (disabled) is 100. If this is enabled, the max. will be raised to 750 or 1000 depending on the model.

bit 5

DFU

-

-

bit 6

Method for determining the image rotation for the edge to bind on.

Disabled

Enabled

If enabled, the image rotation will be performed as they were in the specifications of older models for the binding of pages of mixed orientation jobs.

The old models are below:

- PCL: Pre-04A models

- PS/PDF/RPCS:Pre-05S models

bit 7

Letterhead mode printing

Disabled

Enabled (Duplex)

Routes all pages through the duplex unit.

If this is disabled, simplex pages or the last page of an odd-paged duplex job, are not routed through the duplex unit. This could result in problems with letterhead/pre-printed pages.

Only affects pages specified as Letterhead paper.

1001

[Bit Switch]

006

Bit Switch 6

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

DFU

-

-

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

DFU

-

-

1001

[Bit Switch]

007

Bit Switch 7

0

1

bit 0

Print path

Disabled

Enabled

If enabled, simplex pages (in mixed simplex/duplex PS/PCL5 jobs only) and the last page of an odd paged duplex job (PS, PCL5, PCL6), are always routed through the duplex unit. Not having to switch paper paths increases the print speed slightly.

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

DFU

-

-

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

DFU

-

-

1001

[Bit Switch]

008

Bit Switch 8

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

[PCL,PS]: Allow BW jobs to print without requiring User Code

Disabled

Enabled (allow BW jobs to print without a user code)

BW jobs submitted without a user code will be printed even if usercode authentication is enabled.

Note: Color jobs will not be printed without a valid user code.

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

PCL, RPCS, PS: Forced BW print

Enabled

Disabled

Switches whether to ignore PDL color command.

bit 7

[PDF]: Orientation Auto Detect Fuction

Enabled

Disabled

Automatically chooses page orientations of PDF jobs (Landscape or Portrait) based on the content.

1001

[Bit Switch]

009

Bit Switch 9

0

1

bit 0

PDL Auto Detection timeout of jobs submitted via USB or Parallel Port (IEEE 1284).

Disabled (Immediately)

Enabled (10 seconds)

To be used if PDL auto-detection fails. A failure of PDL autodetection doesn't necessarily mean that the job can't be printed. This bit switch tells the device whether to time-out immediately (default) upon failure or to wait 10 seconds.

bit 1

DFU

-

-

bit 2

Job Cancel

Disabled (Not cancelled)

Enabled (Cancelled)

If this bit switch, all jobs will be cancelled after a jam occurs.

Note: If this bitsw is enabled, printing under the following conditions might result in problems:

- Job submission via USB or Parallel Port

- Spool printing (WIM >Configuration > Device Settings > System)

bit 3

PCL/PS bypass tray paper rotation (SEF/LEF)

Disabled

Enabled

This bitsw causes the device to revert to the behavior of previous generations. It only takes effect if "Bypass Tray Setting Priority" = "Driver/Command".

Previous spec (bitsw=1): If a standard sized paper mismatch occurred in the bypass tray, the MFP always prompted for SEF paper.

If this bitsw=0 (default) then in the event of a standard sized paper mismatch, the MFP will always prompt for paper of the rotation (SEF/LEF) determined by the MFP bypass tray paper setting or by the bypass tray sensor.

bit 4

Timing of the PJL Status ReadBack (JOB END) when printing multiple collated copies.

Disable

Enable

This bitsw determines the timing of the PJL USTATUS JOB END sent when multiple collated copies are being printed.

0 (default): JOB END is sent by the device to the client after the first copy has completed printing. This causes the page counter to be incremented after the first copy and then again at the end of the job.

1: JOB END is sent by the device to the client after the last copy has finished printing. This causes the page counter to be incremented at the end of each job.

bit 5

Display UTF-8 text in the operation panel

Enabled

Disabled

Enabled (=0):

Text composed of UTF-8 characters can be displayed in the operation panel. Disabled (=1):

UTF-8 characters cannot be displayed in the operation panel.

For example, job names are sometimes stored in the MIB using UTF-8 encoded characters. When these are displayed on the operation panel, they will be garbled unless this BitSw is enabled (=0).

bit 6

Disable super option

Enabled

Disabled

Switches super option disable on / off. It this is On, multiple jobs are grouped at LPR port. PJL settings are enabled even jobs that are specified queue names are sent.

bit 7

Enable/Disable Print from USB/SD's Preview function

Enabled

Disabled

Determines whether Print from USB/SD will have the Preview function. Enabled (=0): Print from USB/SD will have the Preview function.

Disabled (=1): Print from USB/SD will not have the Preview function.

1001

[Bit Switch]

010

Bit Switch A

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

DFU

-

-

bit 4

DFU

-

-

bit 5

Store and Skip Errored Job locks the queue

Queue is not locked after SSEJ

Queue locked after SSEJ

If this is 1, then after a job is stored using Store and Skip Errored Job (SSEJ), new jobs cannot be added to the queue until the stored job has been completely printed.

bit 6

Allow use of Store and Skip Errored Job if connected to an external charge device.

Does not allow SSEJ with ECD

Allows SSEJ with ECD

If this is 0, Store and Skip Errored Job (SSEJ) will be automatically disabled if an external charge device is connected.

Note: We do not officially support enabling this bitsw (1). Use it at your own risk.

bit 7

Job cancels remaining pages when the paid-for pages have been printed on an external charge device

Job does not cancel

Job cancels

When setting 1 is enabled, after printing the paid-for pages on an external charge device, the job that includes any remaining pages will be canceled.

This setting will prevent the next user from printing the unnecessary pages from the previous user's print job.

1001

[Bit Switch]

011

Bit Switch B

0

1

bit 0

Show Menu List

Hide Menu List

Show Menu List

If this is 0, the Menu List button will be removed from Printer Features.

bit 1

Print job interruption

Does not allow interruption

Allow interruption

0 (default): Print jobs are not interrupted. If a job is promoted to the top of the print queue, it will wait for the currently printing job to finish.

1: If a job is promoted to the top of the queue, it will interrupt the currently printing job and start printing immediately.

bit 2

DFU

-

-

bit 3

DFU

-

-

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

DFU

-

-

1001

[Bit Switch]

012

Bit Switch C

0

1

bit 0

DFU

-

-

bit 1

DFU

-

-

bit 2

DFU

-

-

bit 3

DFU

-

-

bit 4

DFU

-

-

bit 5

DFU

-

-

bit 6

DFU

-

-

bit 7

DFU

-

-

1003

[Clear Setting]

001

Initialize System

*CTL

[- / - / -]

[Execute]

Initializes settings in the "System" menu of the user mode.

003

Delete Program

*CTL

[- / - / -]

[Execute]

1004

[Print Summary]

Prints the service summary sheet (a summary of all the controller settings).

001

Print Summary

*CTL

[- / - / -]

[Execute]

002

Print Summary2

*CTL

[- / - / -]

[Execute]

1005

[Display Version]

002

Printer Version

*CTL

[ - / - / - ]

Displays the version of the controller firmware.

1006

[Sample / Proof Print]

002

Sample / Proof Print

*CTL

[0 or 1 / 1 / 1 /step]

0: Linked, 1: On

Enables and disables the document server. When you select "0," the document server is enabled or disabled in accordance with Copy Service Mode SP5-967. When you select "1," the document server is enabled regardless of Copy Service Mode SP5-967.

1101

[Data Recall]

Recalls a set of gamma settings. This can be either a) the factory setting, b) the previous setting, or c) the current setting.

001

Factory

*CTL

[ - / - / - ]

[Execute]

002

Previous

*CTL

003

Current

*CTL

1102

[Resolution Setting]

Selects the printing mode (resolution) for the printer gamma adjustment.

001

Resolution Setting

CTL

[0 to 9 / 0 / 1/step]

0: 1200x1200 Photo (2bit/4col) 1: 1200x1200 Photo (1bit/4col) 2: 600x600 Photo (4bit/4col)

3: 600x600 Photo (2bit/4col) 4: 600x600 Photo (1bit/4col) 5: 1200x1200 Text (2bit/4col) 6: 1200x1200 Text (1bit/4col) 7: 600x600 Text (4bit/4col)

8: 600x600 Text (2bit/4col) 9: 600x600 Text (1bit/4col)

1103

[Test Page]

Prints the test page to check the color balance before and after the gamma adjustment.

001

Color Gray Scale

CTL

[ - / - / - ]

[Execute]

002

Color Pattern

CTL

1104

[Gamma Adjustment]

Adjusts the printer gamma for the mode selected in the "Mode Selection" menu.

001

Set Black 1

CTL

[0 to 30 / 00 / 1/step ]

002

Set Black 2

CTL

003

Set Black 3

CTL

004

Set Black 4

CTL

005

Set Black 5

CTL

006

Set Black 6

CTL

007

Set Black 7

CTL

008

Set Black 8

CTL

009

Set Black 9

CTL

010

Set Black 10

CTL

011

Set Black 11

CTL

012

Set Black 12

CTL

013

Set Black 13

CTL

014

Set Black 14

CTL

015

Set Black 15

CTL

016

Set Black 16

CTL

021

Set Cyan 1

CTL

[0 to 30 / 00 / 1/step ]

022

Set Cyan 2

CTL

023

Set Cyan 3

CTL

024

Set Cyan 4

CTL

025

Set Cyan 5

CTL

026

Set Cyan 6

CTL

027

Set Cyan 7

CTL

028

Set Cyan 8

CTL

029

Set Cyan 9

CTL

030

Set Cyan 10

CTL

031

Set Cyan 11

CTL

032

Set Cyan 12

CTL

033

Set Cyan 13

CTL

034

Set Cyan 14

CTL

035

Set Cyan 15

CTL

036

Set Cyan 16

CTL

041

Set Magenta 1

CTL

[0 to 30 / 00 / 1/step ]

042

Set Magenta 2

CTL

043

Set Magenta 3

CTL

044

Set Magenta 4

CTL

045

Set Magenta 5

CTL

046

Set Magenta 6

CTL

047

Set Magenta 7

CTL

048

Set Magenta 8

CTL

049

Set Magenta 9

CTL

050

Set Magenta 10

CTL

051

Set Magenta 11

CTL

052

Set Magenta 12

CTL

053

Set Magenta 13

CTL

054

Set Magenta 14

CTL

055

Set Magenta 15

CTL

056

Set Magenta 16

CTL

061

Set Yellow 1

CTL

[0 to 30 / 00 / 1/step ]

062

Set Yellow 2

CTL

063

Set Yellow 3

CTL

064

Set Yellow 4

CTL

065

Set Yellow 5

CTL

066

Set Yellow 6

CTL

067

Set Yellow 7

CTL

068

Set Yellow 8

CTL

069

Set Yellow 9

CTL

070

Set Yellow 10

CTL

071

Set Yellow 11

CTL

072

Set Yellow 12

CTL

073

Set Yellow 13

CTL

074

Set Yellow 14

CTL

075

Set Yellow 15

CTL

076

Set Yellow 16

CTL

1105

[Save Tone Control Value]

Stores the print gamma adjusted with the "Gamma Adj." menu item as the current setting. Before the machine stores the new "current setting", it moves the data currently stored as the "current setting" to the "previous setting" memory storage location.

001

Save Tone Control Value

*CTL

[ - / - / - ]

[Execute]

1106

[Toner Limit]

Adjusts the maximum toner amount for image development.

001

Toner Limit Value

*CTL

[0 to 400 / 0 / 1 %/step ]

1106

[Toner Limit]

Adjusts the maximum toner amount for image development.

001

Toner Limit Value

*CTL

[0 to 400 / 0 / 1 %/step ]

1106

[Toner Limit]

Adjusts the maximum toner amount for image development.

001

Toner Limit Value

*CTL

[0 to 400 / 0 / 1 %/step ]

1110

[Media Print Device Setting]

Selects the setting for the media print device.

002

0: Disable 1: Enable

*CTL

[0 or 1 / 1 / 1 / step]

1110

[Media Print Device Setting]

Selects the setting for the media print device.

002

0: Disable 1: Enable

*CTL

[0 or 1 / 1 / 1 / step]

1110

[Media Print Device Setting]

Selects the setting for the media print device.

002

0: Disable 1: Enable

*CTL

[0 or 1 / 1 / 1 / step]

1111

[All Job Delete Mode]

001

-

*CTL

[ 0 or 1 / 0 / 1 / step ] 0: Excluding New Job 1: Including New Job

Selects whether to include an image processing job in jobs subject to full cancellation from the SCS job list.