IMAGE QUALITY TEST/ SETTINGS Ricoh MP C2004 C2504 Service Manual

HOME PAGE | < Previous | Contents | Next >

Installation

For Machines with Preinstalled ARDF: Fax Stamp Installation (Option)

This procedure is required for the machine which the fax function is installed as standard.

1. Open the ARDF original cover and stamp holder [A].

2. Install the fax stamp [A] provided with the machine.

3. Close the holder.

Make sure that it is pushed in to the position where the marks on the holder and the exterior cover face each other. If not, jam detection (001) will occur.

2.2.5 IMAGE QUALITY TEST/ SETTINGS

Before Test

 Perform the image quality test after installing all peripherals

 Confirm that there are no accessories (such as screws and clamps) left inside the main machine and peripherals

Before Test Loading Paper ACC Execution and Color Registration Adjustment Checking the Copy Image with the Test Chart Paper Settings Auto Remote Firmware Update Settings Enabling the Copy Data Security Function HDD Security Function Setting Settings Relevant to the Service Contract

HOME PAGE |

< Previous | Contents | Next >