HOME PAGE | < Previous | Contents | Next >
Loading Paper
1. Turn ON the main power.
2. Check that the operation panel shows "No Paper" under the "Check Status" screen.
3. The paper size is basically detected automatically.
1. Pull out the paper feed tray slowly until it stops.
2. Load the paper.
3. While pressing the release lever, adjust the side fence to the paper size to be set.
4. Set the back fence.
ACC Execution and Color Registration Adjustment
If not transferred to printouts, the PCDU seals will not be removed correctly. Remove the PCDU seals, and then execute SP2-111-004 (Forced Line Position Adj. Mode d).
1. Do the "Automatic Color Calibration (ACC)" for the copier mode & printer mode as follows:
- Copier mode -
1. "User Tools" icon > "Machine Features" > "Maintenance" > "Auto Color Calibration" > "Copier Function" > "Start"
2. Press "Start Printing".
3. Put the printout on the exposure glass.
4. Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
5. Close the SPDF/ARDF or the platen cover.
6. Press "Start Scanning" on the LCD. Then, the machine starts the ACC.
- Printer mode -
1. "Printer Function" > "Start"
2. Select a test pattern.
Print each ACC test pattern. There are 5 test patterns as follows: Test Pattern 1: 600x600 dpi
Test Pattern 2: 1800x600 dpi Test Pattern 3: 9000x600 dpi
Main Machine Installation
Installation
Installation
Installation
Test Pattern 4: 1200x1200 dpi Test Pattern 5: 3600x1200 dpi
3. Press "Start Printing".
4. Put the printout on the exposure glass.
5. Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.
6. Close the SPDF/ARDF or the platen cover.
7. Press "Start Scanning" on the LCD. Then, the machine starts the ACC.
8. Repeat steps 1 to 7 until all the ACC test patterns have been printed.
2. Exit the User Tools mode.
3. Press the “Document Server” icon.
Or press and hold the [A] key and "Check Status [B]" at the same time until the number keyboard screen is displayed.
4. Enter the key code for SP mode.
Main Machine Installation
5. Perform line adjustment.
1. Execute SP2-111-004 (Forced Line Position Adj. Mode d)
2. The result can be checked with SP2-194-007 (MUSIC Execution Result) 0: Success, 1: Failure
If failure, execute SP2-111-004 once more and check the result again.
Fix the color registration errors, referring to page 4-233 "Judgment for Type of Color Registration Error".
Also, results for each color can be checked with SP2-194-010 to 013 (MUSIC Execution Result: Error Result C, M, Y, K).
1: Completed successfully
6. Exit the SP mode. SP descriptions
SP2-111-004 (Forced Line Position Adj. Mode d)
Executes the fine line position adjustment and rough line position adjustment.
SP2-194-007 (MUSIC Execution Result: Execution Result)
Displays the result code of MUSIC adjustment. 0: Success
1: Failure
SP2-194-010 to 013 (MUSIC Execution Result: Error Result C,M, Y, K)
Displays the result code of MUSIC adjustment for each color. 0: Not done
1: Completed successfully 2: Cannot detect patterns
3: Fewer lines on the pattern than the target 4: Out of the adjustment range
5 to 9: Not used