HOME PAGE | < Previous | Contents | Next >
Specifications
Specifications
Specifications
1.3 SUPPORTED PAPER SIZES
1.3.1 ORIGINAL SIZE DETECTION
Size (W x L) [mm] | NA | EU/AP | ||
Book | ADF | Book | ADF | |
A3 SEF (297 x 420) | - | Y | Y*4 | Y |
B4 SEF (257 x 364) | - | - | Y*4 | Y |
A4 SEF (210 x 297) | Y*5 | Y | Y*4, 5 | Y |
A4 LEF (297 x 210) | Y*5 | Y | Y*4, 5 | Y |
B5 SEF (182 x 257) | - | - | Y*4 | Y |
B5 LEF (257 x 182) | - | - | Y*4 | Y |
A5 SEF (148 x 210) | - | - | Y*2, 4 | Y |
A5 LEF (210 x 148) | - | - | Y*4 | Y |
B6 SEF (128 x 182) | - | - | - | Y |
B6 LEF (182 x 128) | - | - | - | Y |
DLT SEF (11" x 17") | Y | Y*Db | - | Y*Df |
LG SEF (81/2" x 14") | Y | Y*Dc | - | - |
LT SEF (81/2" x 11") | Y*5 | Y*Dd | Y*5 | Y*Di |
LT LEF (11" x 81/2") | Y*5 | Y*De | Y*5 | Y*Dg |
HLT SEF (51/2" x 81/2") | Y*2 | Y | - | - |
HLT LEF (81/2" x 51/2") | Y | Y | - | - |
F SEF (8" x 13") | - | - | Y*S3 | Y*S3 |
Foolscap SEF (81/2" x 13") | - | Y*Sc | Y*D3 | Y*D3 |
Folio SEF (81/4" x 13") | - | - | Y*S3 | Y*S3 |
Supported Paper Sizes
Size (W x L) [mm] | NA | EU/AP | ||
Book | ADF | Book | ADF | |
Folio SEF (11" x 15") | - | Y*Sb | - | - |
Folio SEF (10" x 14") | - | Y | - | - |
Folio SEF (8" x 10") | - | Y*Sd | - | - |
US EXE SEF (71/4" x 101/2") | - | Y | - | - |
US EXE LEF (101/2 x 71/4") | - | Y*Se | - | - |
8K SEF (267 x 390) | - | - | Y*4 | Y*Sf |
16K SEF (195 x 267) | - | - | Y*4 | Y*Si |
16K LEF (267 x 195) | - | - | Y*4v | Y*Sg |
Sizes with letters (a, b, c) means only either size with the corresponding letter can be selected for size detection. “D” is for default set sizes, and when setting “S” sizes for size detection from SP mode, “D” sizes can no longer be detected.
(*2)For detected originals smaller then A5 size, with SP mode either “detect as A5” or “Detect as Unknown” can be selected. (Default is “Detect as unknown”)
(*3)F Sizes (8.5” x 13” SEF, 8.25” x 13” SEF, 8” x 13” SEF) will be available by SP mode settings. (*4)Switch Book scanner original detection between “K” series and ”A/B” series from SP mode. (Can not set both to detect, but 8K/16K detect can de set from SO mode)
8K SEF -> Switch between A3, B4 SEF
16K SEF -> Switch between A4, A5, B5 SEF
16K LEF -> Switch between A4, A5, B5 LEF *Can not switch only either size. (*5)Can be selected with switching A4/LT from SP mode:
Standard detect (default)
When placing A4/LT size LEF, detect as A4 LEF. When placing SEF, detect as LT SEF.
When placing A4/LT size LEF, detect as LT LEF. When placing SEF, detect as A4 SEF.
Remarks:
Y | Yes; available |
- | Not available |