HOME PAGE | < Previous | Contents | Next >
SPDF DF3100 (D3B0)
SPDF DF3100 (D3B0)
SPDF DF3100 (D3B0)
2. DETAILED DESCRIPTIONS
2.1 SPDF DF3100 (D3B0)
2.1.1 CHANGES FROM THE PREVIOUS MACHINE
1. CIS mis-installation prevention
To prevent installing the wrong kind of CIS in the DF3100, a blue label [A] is attached to the CIS. Check that the color on this label is the same as the marking [B], to prevent installing the wrong CIS.
[A] (Blue label): CIS for DF3100
[B] (Orange label): CIS for other machines
If the wrong CIS is installed, JAM001 will occur if sheet-through scanning is done. When JAM001 continues three times, SC151 or SC152 will occur.
2. Back curl "U" folding prevention
To prevent the originals from folding when picking up paper that is curled upward, the slope of the paper feed guide [A] has been changed.
SPDF DF3100 (D3B0)
3. Smaller original exit motor
Changed the original exit motor to a next generation motor [A] with a smaller size.
4. Addition of fire prevention enclosure
To prevent fire spreading from the CIS [A] and the DF main board, a fire prevention enclosure (shown by the red lines) has been added.
CIS [A]
SPDF DF3100 (D3B0)
SPDF DF3100 (D3B0)
SPDF DF3100 (D3B0)
SPDF DF3100 (D3B0)
ADF control board
5. Addition of cushioning to the outer cover
Cushioning has been added to the DF cover to reduce noise. [A]: DF top cover, [B]: DF rear cover, [C]: Original transport guide
SPDF DF3100 (D3B0)
.