HOME PAGE | < Previous | Contents | Next >

Exterior Covers‌‌


SPDF DF3100 (D3B0)

SPDF DF3100 (D3B0)

SPDF DF3100 (D3B0)

1. REPLACEMENT AND ADJUSTMENT


1.1 EXTERIOR COVERS


1.1.1 ADF FRONT COVER

1. Open the feed cover [A].

image

2. Slide the ADF front cover [A] to the left.

image


Check the position of the hooks in the photo below before removing.

Exterior Covers


image

 

EXTERIOR COVERSADF FRONT COVERADF REAR COVERFEED COVERFEED UNITORIGINAL FEED UNITSENSORS, FEELER, AND SWITCHESORIGINAL REGISTRATION SENSORORIGINAL EXIT SENSORSEPARATION SENSOR, SKEW CORRECTION SENSORORIGINAL WIDTH SENSOR, INTERVAL SENSORORIGINAL LENGTH SENSORSA4 LEF, LT LEF SensorAPS FEELERADF LIFT INTERLOCK SWITCH, LIFT SENSORORIGINAL SET SENSORBOTTOM PLATE HP SENSORBOTTOM PLATE POSITION SENSORADF FEED COVER INTERLOCK SWITCH, PICK-UP ROLLER HP SENSORMOTORSADF ENTRANCE MOTORADF SCANNING MOTORADF EXIT MOTORADF BOTTOM PLATE LIFT MOTORADF PICK-UP ROLLER LIFT MOTOR, ADF TRANSPORT MOTORADF FEED MOTORROLLERS AND BELTSPICK-UP ROLLER, TRANSPORT BELTADF SEPARATION ROLLERBOARDSADF CONTROLLER BOARDCIS UNITCIS WHITE ROLLER CLEANINGADJUSTMENT AFTER ADF REPLACEMENTCHECKING THE VERTICAL REGISTRATIONCHECKING THE HORIZONTAL REGISTRATIONCHECKING SKEWCHECKING MAGNIFICATIONPLATEN ADJUSTMENT

  

 

HOME PAGE |

< Previous | Contents | Next >