HOME PAGE | < Previous | Contents | Next >
1.5 ROLLERS AND BELTS
1.5.1 PICK-UP ROLLER, TRANSPORT BELT
1. Remove original feed unit. (page 5)
2. Slide bushing [A], and then remove the pick-up roller unit [B].
At re-assembly, make sure that the tab on the front guide plate [A] is above the pick-up roller [B].
3. Pick-up roller cover [A] and pick-up roller [B].
Rollers and Belts
SPDF DF3100 (D3B0)
SPDF DF3100 (D3B0)
SPDF DF3100 (D3B0)
4. Lift the left and right sides of the feed belt holder [A], then remove it.
5. Remove the feed belt [B] from the feed belt holder [A].
