Gets the stapler HP sensor information of non staple finisher. (0: Sensor On, “0“ appears if sensor detects home position)

6-184-008

Tray Full Detection Sensor 1

ENG

[0 or 1 / 0 / 1/step]

Gets the tray full detection sensor 1 information of non staple finisher. (0: Paper overflow )

6-184-009

Tray Full Detection Sensor 2

ENG

[0 or 1 / 0 / 1/step]

Gets the tray full detection sensor 2 information of non staple finisher. (0: Paper overflow )

6-184-010

Slide Door Open/Close Door SW

ENG

[0 or 1 / 0 / 1/step]

Gets the slide door switch information of non staple finisher. (0: Close, 1: Open)

5804

[OUTPUT Check]

5-804-001

Feed Pickup Solenoid 1 This setting is not available for

MP C2004/MP C2504.

ENG

[0 or 1 / 0 / 1/step]

Moves 1st paper feed tray pick up solenoid.

5-804-002

Feed Pickup Solenoid 2 This setting is not available for

MP C2004/MP C2504.

ENG

[0 or 1 / 0 / 1/step]

Moves 2nd paper feed tray pick up solenoid.

5-804-003

Bypass Pickup Solenoid

ENG

[0 or 1 / 0 / 1/step]

Moves bypass pick up solenoid.

5-804-004

Exit Junction Solenoid

ENG

[0 or 1 / 0 / 1/step]

Moves output paper divide solenoid.

5804

[OUTPUT Check]

Moves paper feed tray rising motor.

* Do not execute SP 5-804-006/008 without removing the paper tray. Otherwise, the tray might be damaged.

5-804-005

Tray 1 Lift Motor:CW

ENG

[0 or 1 / 0 / 1/step]

5-804-006

Tray 1 Lift Motor:CCW

ENG

5-804-007

Tray 2 Lift Motor:CW

ENG

5-804-008

Tray 2 Lift Motor:CCW

ENG

5804

[OUTPUT Check]

Moves register motor.

5-804-009

Regist Motor:CCW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-011

Regist Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-015

Regist Motor:Position Hold

ENG

[0 or 1 / 0 / 1/step]

Holds position of register motor.

5804

[OUTPUT Check]

Moves paper feed motor.

* It is fed if there is paper in the paper tray.

5-804-016

Feed Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-018

Feed Motor:CW:Low Speed

ENG

5-804-022

Feed Motor:CCW:Standard Speed

ENG

5-804-024

Feed Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

Moves transport motor.

5-804-028

Bypass V-Transport Motor:CW:Std Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-030

Bypass V-Transport Motor:CW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-034

Bypass V-Transport Motor:Position Hold

ENG

[0 or 1 / 0 / 1/step]

Holds position of transport motor.

5-804-037

Exit Motor: CW: Fusing Pressure Release

ENG

[0 or 1 / 0 / 1/step]

Moves fusing dis-pressure.

* If driving this motor while attaching the fusing unit, be sure to stop it less than 5 seconds. Otherwise, the unit might be damaged.

5804

[OUTPUT Check]

Moves paper exit motor.

5-804-041

Exit Motor:CCW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-043

Exit Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

Moves reverse motor.

5-804-047

Inverter Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-049

Inverter Motor:CW:Low Speed

ENG

5-804-052

Inverter Mt: CW: Normal Speed: Duplex

ENG

5-804-054

Inverter Mt: CW: Low Speed: Duplex

ENG

5-804-056

Inverter Motor:CCW:Standard Speed

ENG

5-804-058

Inverter Motor:CCW:Low Speed

ENG

5-804-061

Inverter Mt: CCW: Normal Speed: Inc Speed

ENG

5804

[OUTPUT Check]

Moves duplex entrance motor.

5-804-065

Duplex Entrance Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-067

Duplex Entrance Motor:CW:Low Speed

ENG

5-804-068

Duplex Entrance Motor: Normal Speed: Duplex

ENG

5-804-069

Duplex Entrance Motor: Low Speed: Duplex

ENG

5804

[OUTPUT Check]

Moves bypass/duplex motor.

5-804-071

Duplex Bypass Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-073

Duplex Bypass Motor:CW:Low Speed

ENG

5-804-074

Duplex Bypass Motor: CW: Normal Speed: Dup

ENG

5-804-075

Duplex Bypass Motor: CW: Low Speed: Duplex

ENG

5-804-077

Duplex Bypass Motor:CCW:Standard Speed

ENG

5-804-079

Duplex Bypass Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-083

Duplex Bypass Motor:Position Hold

ENG

[0 or 1 / 0 / 1/step]

Holds position of bypass/duplex motor.

5804

[OUTPUT Check]

Moves fusing motor. *See Important below

5-804-092

Fusing Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-094

Fusing Motor:CW:Low Speed

ENG

5-804-098

Fusing Motor:CCW:Low Speed

ENG

Important: Use the procedure below to do the output checks for the fusing exit motor. If you do not follow this procedure, a kink will form in the fusing belt sleeve, and the fusing sleeve belt unit will need to be replaced.

1. Do one of the following:

 Open the right cover of the paper bank

 Remove one of the toner bottles

 Pull out the waste toner bottle half-way

 Remove the fusing unit

2. Enter SP mode.

3. Do the following out output checks:

 SP5-804-092 (Fusing Motor:CW:Standard Speed)

 SP5-804-094 (Fusing Motor:CW:Low Speed)

 SP5-804-098 (Fusing Motor:CCW:Low Speed)

4. Without exiting SP mode, turn the main power switch off and then on again. Important: If you exit SP mode before you turn the main power switch off, the fusing exit motor will stay off when the machine warms up. Heat will be concentrated in one area of the fusing belt sleeve and cause a kink to form. If this happens, you will need to replace the fusing sleeve belt unit.

5. Do the reverse of what you did in step 1 (for example, reattach the fusing unit).

5804

[OUTPUT Check]

5-804-104

Polygon Motor: L

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 21969 rpm.

5-804-105

Polygon Motor: M

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 25512 rpm.

5-804-106

Polygon Motor: H

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 30236 rpm.

5-804-107

Polygon Motor: HH

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 34488 rpm.

5-804-110

Fusing Fan: Full Speed

ENG

[0 or 1 / 0 / 1/step]

Moves fusing exhaust fan.

5-804-111

Fusing Fan: Half Speed

ENG

[0 or 1 / 0 / 1/step]

Moves fusing exhaust fan.

5-804-113

PSU Cooling/Exhaust Heat Fan

ENG

[0 or 1 / 0 / 1/step]

Moves PSU cooling fan and PSU exhaust fan (not included in this machine).

5-804-114

Ozone Fan

ENG

[0 or 1 / 0 / 1/step]

Moves ozone exhaust heat fan.

5-804-115

PCB Box Cooling Fan/ Exhaust Cooling Fan

ENG

[0 or 1 / 0 / 1/step]

Moves controller box cooling fan and exhaust cooling fan.

5-804-116

Development: Right: Half Speed

ENG

[0 or 1 / 0 / 1/step]

Moves development intake fan.

5-804-117

Drive Cooling/ Main/ Toner Supply Cooling Fan

ENG

[0 or 1 / 0 / 1/step]

Moves drive cooling fan (not included in this machine), main exhaust fan (not included in this machine), and toner supply cooling fan.

5-804-118

Development: Right

ENG

[0 or 1 / 0 / 1/step]

Moves development intake fan.

5-804-119

Development Solenoid

ENG

[0 or 1 / 0 / 1/step]

Moves development solenoid.

5804

[OUTPUT Check]

Moves development motor.

5-804-128

Development Motor FC: Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-130

Development Motor FC: Low Speed

ENG

5804

[OUTPUT Check]

Moves/Stops PCU motor :CMY.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-132

Drum Motor FC: Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-134

Drum Motor FC: Low Speed

ENG

5804

[OUTPUT Check]

Moves/Stops PCU motor: Black/ ITB drive motor.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-136

Transfer Drum Motor K: Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-138

Transfer Drum Motor K: Low Speed

ENG

5804

[OUTPUT Check]

Moves paper transfer contact and release motor.

5-804-140

PTR Contact Motor:CW

ENG

[0 or 1 / 0 / 1/step]

5-804-141

PTR Contact Motor:CCW

ENG

5804

[OUTPUT Check]

Moves ITB contact and release motor (reverse to toner supply motor M).

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-150

Toner Supply Motor M:CW:(ITB Contact)

ENG

[0 or 1 / 0 / 1/step]

5804

[OUTPUT Check]

Moves relay carry motor (bridge unit)/left paper exit carry motor (left paper exit tray).

5-804-163

Bridge Relay/Left Exit Motor: Normal Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-165

Bridge Relay/Left Exit Motor: Low Speed

ENG

5-804-166

Bridge Relay/Left Ex Mt: Normal Speed Upper

ENG

5804

[OUTPUT Check]

5-804-169

Bridge Junction/Left Exit Junction Solenoid

ENG

[0 or 1 / 0 / 1/step]

Moves relay divide solenoid (bridge unit)/left paper exit divide solenoid (left paper exit tray).

5-804-170

Shift Tray Motor:CW

ENG

[0 or 1 / 0 / 1/step]

Moves shift tray motor.

5-804-171

Shift Tray Motor:CCW

ENG

[0 or 1 / 0 / 1/step]

Moves shift tray motor.

5-804-172

Toner End Sensor: K Power

ENG

[0 or 1 / 0 / 1/step]

Supples power to toner end sensor (K).

5-804-173

Toner End Sensor: FC Power

ENG

[0 or 1 / 0 / 1/step]

Supples power to toner end sensor (FC).

5-804-174

Drum PCL: K

ENG

[0 or 1 / 0 / 1/step]

Lights (PWM drive) the drum PCL (K).

* Continuing the OPC's exposure, it might accumulate damage due to electrostatic locally.

 If operating QL without rotation, be sure to stop it within 10 seconds.

 Do rotate the OPC drum when QL is turned on.

5-804-175

Drum PCL: FC

ENG

[0 or 1 / 0 / 1/step]

Lights (PWM drive) the drum PCL (FC).

* Continuing the OPC's exposure, it might accumulate damage due to electrostatic locally.

 If operating QL without rotation, be sure to stop it within 10 seconds.

 Do rotate the OPC drum when QL is turned on.

5804

[OUTPUT Check]

Outputs PWM for electrify HVP (DC/AC:Y/M/C/K).

5-804-176

PP: Charge DC: Y

ENG

[0 or 1 / 0 / 1/step]

5-804-177

PP: Charge DC: M

ENG

5-804-178

PP: Charge DC: C

ENG

5-804-179

PP: Charge DC: K

ENG

5-804-180

PP: Charge AC: Y

ENG

[0 or 1 / 0 / 1/step]

This setting is not available for MP C2004/MP C2504

5-804-181

PP: Charge AC: M

ENG

5-804-182

PP: Charge AC: C

ENG

5-804-183

PP: Charge AC: K

ENG

5804

[OUTPUT Check]

Outputs PWM for develop HVP.

5-804-184

PP: Development: Y

ENG

[0 or 1 / 0 / 1/step]

5-804-185

PP: Development: M

ENG

5-804-186

PP: Development: C

ENG

5-804-187

PP: Development: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (image transfer: Y/M/C/K).

5-804-195

PP: ITB: Y

ENG

[0 or 1 / 0 / 1/step]

5-804-196

PP: ITB: M

ENG

5-804-197

PP: ITB: C

ENG

5-804-198

PP: ITB: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (paper transfer: +/-).

5-804-199

PP: PTR: +

ENG

[0 or 1 / 0 / 1/step]

5-804-200

PP: PTR: -

ENG

5804

[OUTPUT Check]

5-804-202

Scanner Lamp

ENG

[0 or 1 / 0 / 1/step]

Checks output of scanner lamp.

Use to check light source malfunction when SC101-01, SC101-02, SC102-00, SC142-00 occurs.

5-804-206

PTR Open/Close LED

ENG

[0 or 1 / 0 / 1/step]

Lights paper transfer open/close LED.

5-804-208

TM/P Sensor: F

ENG

[0 or 1 / 0 / 1/step]

Lights TM/P sensor: Front glowing part.

5-804-209

TM/P Sensor: C

ENG

[0 or 1 / 0 / 1/step]

Lights TM/P sensor: Center glowing part.

5-804-210

TM/P Sensor: R

ENG

[0 or 1 / 0 / 1/step]

Lights TM/P sensor: Rear glowing part.

5-804-211

Toner Sensor Power

ENG

[0 or 1 / 0 / 1/step]

5-804-232

Toner IDTAG Power

ENG

[0 or 1 / 0 / 1/step]

5804

[OUTPUT Check]

5-804-239

Fusing Exit Drive Solenoid

ENG

[0 or 1 / 0 / 1/step]

5804

[OUTPUT Check]

Continuously drives specified motor for operation test.

5-804-241

Bank: Tray3: Feed Mt: Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-242

Bank: Tray4: Feed Mt: Standard Speed

ENG

5-804-243

Bank: Tray5: Feed Mt: Standard Speed

ENG

5-804-244

Bank: Tray3: Transport Mt: Standard Speed

ENG