HOME PAGE | < Previous | Contents | Next >
Gets sensor information from ADF. Gives 1 when pick up roller is not in home position. | |||
6-011-021 | Bottom Plate HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets sensor information from ADF. Gives 1 when bottom plate is not in home position. | |||
6-011-022 | Bottom Plate Position Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets sensor information from ADF. Gives 1 when pick up roller is not in the correct position. | |||
6-011-023 | Original Length 4 (LT/A4 Tail Sensor) | ENG | [0 or 1 / 0 / 1/step] |
Gets sensor information from ADF. Gives 1 when there is a paper at sensor area. | |||
Finisher
6123 | [INPUT Check: 2K/3K FIN] | ||
6-123-001 | Entrance Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-002 | Horizontal Transport Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-003 | Switchback Transport Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-004 | Proof Tray Exit Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-005 | Shift Tray Exit Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
Input and Output Check
6-123-006 | Booklet Stapler Exit Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-007 | Paper Exit Open/Close Guide HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-008 | Punch HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-009 | Punch Move HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-010 | S-to-S Registration Detection HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-011 | Lower Junction Solenoid HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-012 | Jogger HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-013 | Positioning Roller HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-014 | Feed-out HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-015 | Stapler Moving HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-016 | Booklet Stapler HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-017 | Booklet Jogger HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
Input and Output Check
6-123-018 | Booklet Jog Solenoid HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-019 | Booklet Standard Fence HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-020 | Booklet Stapler HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-022 | Folder Blade Cam HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-023 | Folder Blade HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-024 | Shift Roller HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-028 | Drag Roller Vibrating HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-029 | LE Guide HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-030 | TE Stack Plate HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-031 | Staple Tray Paper Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-032 | ITB Paper Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
Input and Output Check
6-123-033 | Booklet Stapler Transport Paper Sn: Upper | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-034 | Booklet Stapler Transport Paper Sn: Lower | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-035 | Paper Height Sensor: Shift | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-036 | Corner Stapler Paper Height Sensor 1 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-037 | Corner Stapler Paper Height Sensor 2 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-038 | Proof Tray Full Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-039 | Booklet Stapler Full Sensor 1 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-040 | Booklet Stapler Full Sensor 2 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-041 | S-to-S Registration Detection Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-042 | Punch RPS Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-043 | Corner Stapler Leading Edge Detection Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
Input and Output Check
6-123-044 | Corner Stapler Staple End Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-045 | Booklet Stapler Staple End Sensor: Front | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-046 | Booklet Stapler Staple End Sensor: Rear | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-047 | Shift Tray Lower Limit Sensor 1 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-048 | Shift Tray Lower Limit Sensor 2 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-049 | Shift Tray Lower Limit Sensor 3 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-050 | Shift Tray Lower Limit Sensor 4 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-051 | Shift Tray Lower Limit Sensor 5 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-052 | Punch Chad Full Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-123-053 | Punch Set Detection | ENG | [0 or 1 / 0 / 1/step] 0: connected 1: not connected |
Input and Output Check
Gets connection status of punch unit. | |||
6-123-054 | Shift Jogger Set Detection | ENG | [0 or 1 / 0 / 1/step] 0: connected 1: not connected |
Gets connection status of setting jogger unit. * Not use: currently, VOLGA-B does not have setting jogger in system configuration. | |||
6-123-055 | Booklet Stapler Set Detection | ENG | [0 or 1 / 0 / 1/step] 0: not connected 1: connected |
Gets connection status of saddle stitch unit. | |||
6-123-056 | Front Door SW | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-057 | Dynamic Roller Open/Close Guide Plate Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-058 | Tray Upper Limit SW | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-059 | Paper Exit Open/Close Guide Plate Limit SW | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-060 | Punch Selection DIPSW 1 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-061 | Punch Selection DIPSW 2 | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-065 | Paper Guide HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-066 | Shift Jogger HP Sensor: Front | ENG | [0 or 1 / 0 / 1/step] |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
Input and Output Check
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-067 | Shift Jogger HP Sensor: Rear | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-068 | Shift Jogger Retraction HP Sensor: Upper | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-123-069 | Shift Jogger Retraction HP Sensor: Lower | ENG | [0 or 1 / 0 / 1/step] |
Gets information of specified switch. Displays signal level of switch as it is. | |||
6135 | [INPUT Check: FrontFIN] | ||
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-135-001 | Entrance Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-002 | Carry Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-003 | Exit Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-004 | Staple Tray Paper Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-005 | Front Jogger HP Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-006 | Rear Jogger HP Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-007 | Sft Roller HP Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-008 | Hitroll HP Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-009 | Ext Guide Plate HP Sensor | *ENG | [0 or 1 / 0 / 1/step] |
6-135-010 | Staple Moving HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-011 | Shift Tray Paper Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-012 | Shift Tray Limit Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-013 | Staple Rotation Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-014 | Staple Near End Sensor | ENG | [0 or 1 / 0 / 1/step] |
Input and Output Check
6-135-015 | Self Priming Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-016 | Stopper HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-017 | Punch HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-018 | Punch Pluse Count Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-019 | Punch Chad Full Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-020 | Punch Moving HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-021 | Punch Registration Detection HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-135-022 | Punch Registration Detection Sensor | ENG | [0 or 1 / 0 / 1/step] |
6135 | [INPUT Check: FrontFIN] | ||
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-135-023 | Slide Door SW | ENG | [0 or 1 / 0 / 1/step] |
6-135-024 | Shift Tray Upper Limit SW | ENG | [0 or 1 / 0 / 1/step] |
6161 | [FIN (1K FIN) INPUT Check] | ||
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-161-001 | Entrance Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-002 | Upper Cover Open/Close Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-003 | Proof Tray Exit Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-004 | Proof Tray Full Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-005 | Shift HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-006 | Exit Guide Plate Open/Close HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-007 | Shift Paper Exit (Lift Tray Exit) Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-008 | Positioning Roller HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
Input and Output Check
6-161-009 | Lift Tray Paper Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-010 | Jogger HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-011 | Feed Out HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-012 | Lift Tray Lower Limit Sensor (Upper) | ENG | [0 or 1 / 0 / 1/step] |
6-161-013 | Lift Tray Lower Limit Sensor (Lower) | ENG | [0 or 1 / 0 / 1/step] |
6-161-014 | Staple Tray Paper Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-015 | Stapler Moving HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-016 | Near End Sensor (Common: Corner/Bklt Stplr) | ENG | [0 or 1 / 0 / 1/step] |
6-161-017 | Self Priming Sensor (Common:Crnr/Bklt Stplr) | ENG | [0 or 1 / 0 / 1/step] |
6-161-018 | Driver HP Sensor (Corner/Booklet Stapler) | ENG | [0 or 1 / 0 / 1/step] |
6-161-020 | Clincher HP Sensor (Corner/Booklet Stapler) | ENG | [0 or 1 / 0 / 1/step] |
6-161-022 | Stapler Retraction Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-023 | Untitled | ENG | [0 or 1 / 0 / 1/step] |
6-161-024 | Untitled | ENG | [0 or 1 / 0 / 1/step] |
6-161-025 | Untitled | ENG | [0 or 1 / 0 / 1/step] |
6-161-026 | Punch HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-027 | Punch RP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-028 | Punch Hopper Full Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-029 | Punch Move HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-030 | S-to-S Registration Detection HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Input and Output Check
6-161-031 | S-to-S Registration Detection Sensor | ENG | [0 or 1 / 0 / 1/step] |
6161 | [FIN (1K FIN) INPUT Check] | ||
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-161-032 | Punch Selection DIPSW 1 | ENG | [0 or 1 / 0 / 1/step] |
6-161-033 | Punch Selection DIPSW 2 | ENG | [0 or 1 / 0 / 1/step] |
6161 | [FIN (1K FIN) INPUT Check] | ||
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-161-034 | ITB Transport Sensor: Right | ENG | [0 or 1 / 0 / 1/step] |
6-161-035 | ITB Transport Sensor: Left | ENG | [0 or 1 / 0 / 1/step] |
6-161-036 | Stack Transport Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-037 | Stack Trans Upper Pressure Release HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-038 | Stack Trans Lower Pressure Release HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-039 | Fold Blade HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-040 | Fold Cam HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-041 | TE Stopper Transport Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-042 | TE Stopper HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-043 | Booklet Folder Exit Sensor | ENG | [0 or 1 / 0 / 1/step] |
6-161-044 | Booklet Folder Tray Full Sensor: Upper | ENG | [0 or 1 / 0 / 1/step] |
6-161-045 | Booklet Folder Tray Full Sensor: Lower | ENG | [0 or 1 / 0 / 1/step] |
6161 | [FIN (1K FIN) INPUT Check] | ||
Gets information of specified switch. Displays signal level of switch as it is. | |||
6-161-046 | Door Open/Close SW | ENG | [0 or 1 / 0 / 1/step] |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
Input and Output Check
6-161-047 | Lift Tray Upper Limit SW | ENG | [0 or 1 / 0 / 1/step] |
6161 | [FIN (1K FIN) INPUT Check] | ||
Gets information of specified sensor. Displays signal level of sensor as it is. | |||
6-161-048 | Paper Guide HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
6184 | [Input Check: NoStplBindFIN] | ||
6-184-001 | Entrance Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets the entrance sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On) | |||
6-184-002 | Exit Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets the paper exit sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On) | |||
6-184-003 | Horizontal Registration Detection Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets the horizontal registration sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On) | |||
6-184-004 | Shift HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets the shift HP sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On) | |||
6-184-005 | Junction Solenoid HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets the junction solenoid HP sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On, “0“ appears if sensor detects home position) | |||
6-184-006 | Exit Pressure Release HP Sensor | ENG | [0 or 1 / 0 / 1/step] |
Gets the exit pressure release HP sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On) | |||
6-184-007 | Stapler HP Sensor | ENG | [0 or 1 / 0 / 1/step] |