HOME PAGE | < Previous | Contents | Next >
Firmware Update (Smart Firmware Update)
System Maintenance
System Maintenance
System Maintenance
How to Install Firmware Downloaded with Reserve
1. Enter the SP mode.
2. Press [Firmware Update].
3. Press [Update].
4. Press [Execute Update].
5. Check the version of the received package firmware, and then press [YES].
Update is started.
Firmware Update (Smart Firmware Update)
If the version of the reserved package in the HDD is older than the latest version, the messages shown in the following picture are displayed.
If you wish to download the latest version, press [Execute] beside the message "Download and update the latest package." Then update of the package firmware will be started.
If you wish to update using the firmware in the HDD (old version), press [Execute] beside the message "Update to the received package."
6. [Update done] is displayed.
The machine will automatically reboot itself.
System Maintenance
System Maintenance
System Maintenance
Firmware Update (Smart Firmware Update)
The figures at the lower right of the display indicate "Number of updated items/ All items to be updated".