Replacement Ricoh MP C2004 C2504 Service Manual

What to Do before Replacing the Image Transfer Cleaning Unit

Before replacing the Image Transfer Belt Cleaning, set SP3-701-102 to "1" and switch the power OFF.

Then replace the Image Transfer Belt Cleaning and switch the power ON.

SP3-701 (Manual New Unit Set)

This SP is the new unit detection flag.

0: new unit detection flag OFF, 1: new unit detection flag ON

Item	SP
Image Transfer Cleaning Unit	SP3-701-102

Replacement

1. Image transfer belt unit (page 4-71)

2. Image transfer lock unit [A]

3. Remove the screws above the image transfer cleaning unit [A].

Image Transfer Unit

Replacement and Adjustment

4. Turn the whole image transfer belt unit over, and remove the screws below the image transfer cleaning unit.

5. While releasing the hook, lift the image transfer belt unit gently, and remove the image transfer cleaning unit.

6. Put toner on the image transfer belt.

[A]: 20mm or more [B]: About 5mm