Brother MFC-L2701D printer paper jam error, machine freeze

[Vivian]

I have a Brother 2701D, the printing error is that sometimes the paper can be pulled up, the first page gets stuck when it reaches the fuser unit, then the machine hangs on the screen, I can't cancel the print command or do anything, it's like it's hanging, sometimes I can't pull the paper up. I have to unplug it and plug it back in for the machine to work. In general, the paper pulling motor sometimes works, sometimes it doesn't. I print a page okay, but the screen on the printer hangs forever without closing the command. Anyone who has encountered this, please give me your opinion. Thanks bro

 

[Rosalind]

This is a strange problem, I've never encountered it before. Check the cable with the formatter card

 

[Cara]

I also suspect that the formatter card is faulty. This kind of intermittent is very difficult to fix

 

[Alexandra]

I once repaired a Brother 2701 printer with an error code of no paper + jam inside, thinking the sensor was broken, but in the end it was a broken formatter card

 

[Venus]

It has the same problem, every time I print 2 or more sheets, the first sheet comes out, the next sheet gets stuck and the machine hangs up, pressing the key doesn't work, it just beeps

 

[Evelyn]

My machine has the same problem?

 

[Rishima]

Check the scan cable, high voltage cable to see if it is loose

 

[Astrid]

Check and re-plug all the connecting cables, when removing and re-plugging, is the pin broken and causing a short circuit?

 

[Rosalind]

This Brother printer has all kinds of strange errors

 

[Sigrid]

You are right. If you buy a printer, avoid Brother. It has not been fixed!