Latest activity

Enter the SP mode. Do SP5-846-051 (Backup All Addr Book). Exit the SP mode, and then turn OFF the main power switch. Remove the SD card...

Service Mode Lock/Unlock At locations where the machine contains sensitive data, the customer engineer cannot operate the machine until...

CONTROLLER BOX Controller cover (page 4-10) Controller box cover (page 4-182) Bracket [A] Controller box [A] IMAGING IOB...

Replacement and Adjustment Paper exit sensor unit [A] Paper exit sensor [A] REVERSE SENSOR Paper exit unit (page 4-145)...

TEMPERATURE AND HUMIDITY SENSOR Remove the 1st and 2nd paper tray. Main power switch cover [A] Insert a screwdriver through the hole...

Replacement and Adjustment Rear cover (page 4-14) Controller box cover (page 4-182) While pressing the lock release lever, pull out...

PREPARATION BEFORE OPERATION CHECK Clean the exposure glasses (for DF and book scanning). Enter the user tools mode. Do the "Automatic...

Installation Remove the operation panel right cover [A]. Thread the USB cable through the notch in the front upper cover [A] and...

Installation Insert the Ethernet cable [A] into the Ethernet port on this option. Insert the other end of the Ethernet cable to a...

Installation Open the right door, and then remove the small cover [A]. Remove the screw and connector, and then remove the front...

1 BIN TRAY BN3110 (D3CQ) ACCESSORY CHECK No. Description Q’ty Remarks 1 Tray 1 2 1 Bin Tray Unit 1 3 Tray support...

Installation Remove the sheet-through exposure glass [A] Remove the rear scale [A] Remove the left scale and exposure glass [A]...

Machine Codes and Peripherals Configuration No. Item Code Remarks 10 Internal Finisher SR3180 D766-18, -22 11 Booklet...

D243/D244 SERVICE MANUAL It is the reader's responsibility when discussing the information contained within this document to...

05/08 Mode Element Sub element Item Subitem Code Sub- code Details Default value Acceptable value RAM Contents Proc edure...