HOME PAGE | < Previous | Contents | Next >
Troubleshooting for Transport/Paper Feeding of the Machine
Target Part/SP No.:Reverse Motor / SP5-804-047 (Inverter Motor:CW:Standard Speed)
Cause verification | Problem Judgement |
Turn the referenced motor OFF with OUTPUT check | Drive sound heard |
Turn the referenced motor ON with OUTPUT check | Drive sound not heard |
Solution:
Reconnect the connector.
Replace the motor.
Replace the Paper Transport IOB.
Replace the harness.
Checking paper jam, or paper status
Check if there is no double feeding. | Fan the paper. |
Paper Exit Sensor: Lag Jam: Cause Code 060
Target Part/SP No.: Paper Exit Sensor / SP5-803-008
Cause verification | Problem Judgement |
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0 :Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Solution:
Clean the sensor.
Reconnect the connector.
Replace the sensor.
Replace the Paper Transport IOB.
Replace the harness.
Checking paper jam, or paper status
Troubleshooting
Troubleshooting
Troubleshooting