HOME PAGE | < Previous | Contents | Next >
How to Clear SC544-02/SC554-02 with a New Unit Detection Fuse
1. Install a new fusing sleeve belt unit. (page 4-134)
2. There is a new unit detection fuse packed with the new fusing sleeve belt unit.
3. Connect the new unit detection fuse to the connector [A], and place the fuse in the empty space [B].
4. Reattach the fusing unit.
5. Switch the power ON.
6. Execute SP5-810-002 [SC Reset: Hard High Temp. Detection].
7. Set SP3-701-116 [Manual New Unit Set: Fusing Belt] to “1”.
8. Switch the power OFF and ON.