HOME PAGE | < Previous | Contents | Next >
Replacement and Adjustment
Replacement and Adjustment
Replacement and Adjustment
Keep NVRAMs (EEPROM) away from any objects that can cause static electricity. Static electricity can damage NVRAM data.
Make sure the serial number is input in the machine for the NVRAM data with SP5-811-004, if not, SC995-001 occurs
Replacing the NVRAM (EEPROM) on the BCU
1. Make sure that you have the SMC report (factory settings). This report comes with the machine.
2. Output the SMC data ("ALL") using SP5-990-001/SP5-992-001.
Make sure to shut down and reboot the machine once before printing/exporting the SMC. Otherwise, the latest settings may not be collected when the SMC is printed/exported.
3. Turn OFF the main power switch.
4. Insert a blank SD card in the SD slot #2, and then turn ON the main power switch.
5. Use SP5-824-001 to upload the NVRAM data from the BCU.
6. Turn off the main power switch and unplug the power cord.
7. Replace the NVRAM on the BCU with a new one.
8. Plug in, and then turn on the main power switch.
When the power is turned ON, SC195-00 appears, but continue with the following steps.
9. Select the destination setting. (SP5-131-001) (JPN: 0, NA: 1, EU/AA/TWN/CHN: 2)
10. Set the following SP, Machine Serial Set (SP5-811-001), Area Selection (SP5-807-001), and CPM Set (SP5-882-001).
For information on how to configure this SP, contact the supervisor in your branch office.
11. Turn off the machine, and then turn it back on.
12. Use SP5-801-002 "Memory Clear Engine".
After changing the EEPROM, Some SPs do not have appropriate initial values. Because of this, steps 10 to 12 are done.
13. Turn off the machine, and then turn it back on.
14. From the SD card where you saved the NV-RAM data in step 5, download the NV-RAM data (SP5-825-001).
15. Turn off the machine, and then remove the SD card from slot #2.
16. Turn on the main power switch.
17. Check the factory setting sheet and the SMC data printout from step 2, and set the user tool and SP settings so they are the same as before.