HOME PAGE | < Previous | Contents | Next >

Fusing Unit‌


Replacement and Adjustment

Replacement and Adjustment

Replacement and Adjustment

9. Remove the spring, and then remove the separation plate [A] and supports [B].


image


4.13.7 PRESSURE ROLLER


Adjustment before Replacing the Pressure Roller

Before replacing the Pressure Roller, set SP3-701-118 to "1" and switch the power OFF. Then replace the pressure roller and switch the power ON.

SP3-701 (Manual New Unit Set)

This SP is the new unit detection flag.

0: new unit detection flag OFF, 1: new unit detection flag ON


Item

SP

Pressure Roller

SP3-701-118

  

 

HOME PAGE |

< Previous | Contents | Next >