HOME PAGE | < Previous | Contents | Next >
Imageable Area Extension Unit Type M19 (D3BR-07)
Installation
Installation
Installation
2.21 IMAGEABLE AREA EXTENSION UNIT TYPE M19 (D3BR-07)
2.21.1 ACCESSORY CHECK
No. | Description | Q’ty | Remarks |
1 | Paper transfer roller (Extended) | 1 |
2.21.2 INSTALLATION PROCEDURE
When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.
Do not touch the roller surface during replacement. Also, when taking out the unit from the box, be careful not to touch the roller surface [A].
Imageable Area Extension Unit Type M19 (D3BR-07)
1. Enter the SP mode.
2. Set SP2-400-001(Paper Transfer Roller Settings Width of Paper Transfer Roller) to "1”.
When SP2-400-001 is changed over, a message is displayed stating "Switch the power OFF/ON".
3. After the SP is changed, turn OFF the main power.
4. Replace the roller [A].
For details about how to replace the roller, refer to page 4-86 "