HOME PAGE | < Previous | Contents | Next >
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
4.11 SERVICE RAM ADDRESSES
4.11.1 SERVICE RAM ADDRESSES
Do not change the settings that are marked as “Not used” or “Read only.”
680001 to 680004(H) - ROM version (Read only)
680001(H) - Revision number (BCD) 680002(H) - Year (BCD)
680003(H) - Month (BCD)
680004(H) - Day (BCD)
680006 to 680015(H) - Machine’s serial number (16 digits - ASCII)
680016(H) - Language code
0: Japanese, 1: UK English, 2: US English, 3: French, 4: German, 5: Spanish, 6: Italian, 7: Dutch,
8: Swedish, 9: Norwegian, 10: Danish, 11: Finnish, 12: Czech, 13: Hungarian, 14: Polish, 15:
Portuguese, 16: Russian, 17: Traditional Chinese, 18: Simplified Chinese, 19: Korean
680018(H) - Total program checksum (low) 680019(H) - Total program checksum (high) 680020 to 68003F(H) - System bit switches 680050 to 68005F(H) - Printer bit switches
680060 to 68007F(H) - Communication bit switches
680080 to 68008F(H) - G3 bit switches
680090 to 68009F(H) - G3-2 bit switches: Not used
6800A0 to 6800AF(H) - G3-3 bit switches: Not used
6800D0(H) - User parameter switch 00 (SWUER_00): Not used 6800D1(H) - User parameter switch 01 (SWUSR_01): Not used 6800D2(H) - User parameter switch 02 (SWUSR_02)
Bit 0: Forwarding mark printing on forwarded messages 0: Disabled, 1: Enabled Bit 1: Center mark printing on received copies
(This switch is not printed on the user parameter list.) 0: Disabled, 1: Enabled
Bit 2: Reception time printing
(This switch is not printed on the user parameter list.) 0: Disabled, 1: Enabled
Bit 3: TSI print on received messages 0: Disabled, 1: Enabled Bit 4: Checkered mark printing
(This switch is not printed on the user parameter list.) 0: Disabled, 1: Enabled
Bit 5: Not used
Service RAM Addresses
Bit 6: Not used Bit 7: Not used
6800D3(H) - User parameter switch 03 (SWUSR_03: Automatic report printout)
Bit 0: Transmission result report (memory transmissions) 0: Off, 1: On Bit 1: Not used
Bit 2: Memory storage report 0: Off, 1: On
Bit 3: Polling reserve report (polling reception) 0: Off, 1: On Bit 4: Polling result report (polling reception) 0: Off, 1: On
Bit 5: Transmission result report (immediate transmissions) 0: Off, 1: On Bit 6: Not used
Bit 7: Journal 0: Off, 1: On
6800D4(H) - User parameter switch 04 (SWUSR_04: Automatic report printout)
Bit 0: Not used
Bit 1: Automatic communication failure report and transfer result report output 0: Off, 1: On Bits 2 to 3: Not used
Bit 4: Indicates the parties 0: Not indicated, 1: Indicated Bit 5: Include sender’s name on reports 0: Off, 1: On Bit 6: Not used
Bit 7: Inclusion of a sample image on reports 0: Off, 1: On
6800D5(H) - User parameter switch 05 (SWUSR_05)
Bit 0: Substitute reception when the base copier is in an SC condition 0: Enabled, 1: Disabled
Bits 1 and 2: Condition for substitute RX when the machine cannot print messages (Paper end, toner end, jam, and during night mode)
Bit 2: 0, Bit 1: 0 = The machine receives all the fax messages.
Bit 2: 0, Bit 1: 1 = The machine receives the fax messages with RTI or CSI.
Bit 2: 1, Bit 1: 0 = The machine receives the fax messages with the same ID code. Bit 2: 1, Bit 1: 1 = The machine does not receive anything.
Bit 3: Not used Bit 4: Not used
Bit 5: Just size printing 0: Off, 1: On Bit 6: Not used
Bit 7: Add paper display when a cassette is empty 0: Off, 1: On
6800D6(H) - User parameter switch 06 (SWUSR_06)
Bit 0:
Bit 1: V8 protocol (G3-1: Super G3) 0: Off, 1: On Bit 2: V8 protocol (G3-2: Super G3) 0: Off, 1: On Bit 3: V8 protocol (G3-3: Super G3) 0: Off, 1: On
6800D7(H) - User parameter switch 07 (SWUSR_07)
Service RAM Addresses
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
Bit 0 Ringing 0: Off, 1: On
Bit1: Automatic answering message 0: Off, 1: On Bit 2: Parallel memory transmission 0: Off, 1: On
Bits 3 and 4: Not used
Bit 5: Remote control 0: Off, 1: On
Bits 6 and 7: Not used
6800D8(H) - User parameter switch 08 (SWUSR_08)
Bits 0 and 1: Not used.
Bit 2: Authorized reception
0: Only faxes from senders whose RTIs/CSIs are specified for this feature are accepted.
1: Only faxes from senders whose RTIs/CSIs are not specified for this feature are accepted. Bits 3 to 7: Not used.
6800D9(H) - User parameter switch 09 (SWUSR_09): Not used
6800DA(H) - User parameter switch 10 (SWUSR_0A)
Bits 0 to 2: Not used
Bit 3: Page reduction 0: Off, 1: On
Bits 4 and 5: Not used
Bit 6: Use both e-mail notification and printed reports to confirm the transmission results 0: Off, 1: On
Bit 7: Not used
6800DB(H) - User parameter switch 11 (SWUSR_0B)
Bits 0 and 1: Not used
Bit 2: White original detection 0: Off, 1: On (alarm and alert message on the LCD) Bit 3: Receive rejection for 1300 Hz transmission 0: Off (receive), 1: On (not receive) Bit 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station 0: Off, 1: On Bit 7: Not used
6800DC(H) - User parameter switch 12 (SWUSR_0C): Not used 6800DD(H) - User parameter switch 13 (SWUSR_0D): Not used 6800DE(H) - User parameter switch 14 (SWUSR_0E)
Bit 0: Message printout while the machine is in Night Printing mode 0: On, 1: Off
Bit 1: Maximum document length detection 0: Double letter, 1: Longer than double-letter (well log)
– up to 1,200 mm Bit 2: Not used
Bit 3: Fax mode settings, such as resolution, before a mode key (Copy/Fax/Printer/Scanner) is pressed 0: Not cleared, 1: Cleared
Bits 4 to 6: Not used Bit 7: Not used
6800DF(H) - User parameter switch 15 (SWUSR_0F)
Service RAM Addresses
(This switch is not printed on the user parameter list.) Bits 0, 1 and 2: Cassette for fax printout
Bit 2: 0, Bit 1: 0, Bit 0: 1 = 1st paper feed station
Bit 2: 0, Bit 1: 1, Bit 0: 0 = 2nd paper feed station
Bit 2: 0, Bit 1: 1, Bit 0: 1 = 3rd paper feed station
Bit 2: 1, Bit 1: 0, Bit 0: 0 = 4th paper feed station
Bit 2: 1, Bit 1: 0, Bit 0: 1 = LCT
Other settings Not used Bits 3 and 4: Not used
Bit 5: Using the cassette specified by bits 0, 1 and 2 above only 0: On, 1: Off
Bits 6 and 7: Not used
6800E0(H) – User parameter switch 16 (SWUSR_10) (This switch is not printed on the user parameter list.) Bits 0 and 1: Not used
Bit 2: Paper size selection priority for an A4 size fax message when A4/LT size paper is not available. 0: A3 has priority, 1: B4 has priority
Bits 3 to 7: Not used
6800E1(H) – User parameter switch 17 (SWUSR_11)
Bit 0: Not used Bit 1: Not used
Bit 2: Inclusion of the “Add” button when a sequence of Quick/Speed dials is selected for broadcasting 0: Not needed, 1: Needed
Bits 3 to 6: Not used
Bit 7: Press “Start” key without an original when using the on hook dial or the external telephone, 0: displays “Cannot detect original size”. 1: Receives fax messages.
6800E2(H) - User parameter switch 18 (SWUSR_12)
Bit 0: TTI date 0: Off, 1: On
Bit 1: TTI sender 0: Off, 1: On
Bit 2: TTI file number 0: Off, 1: On
Bit 3: TTI page number 0: Off, 1: On
Bits 4 to 6: Not used Bit 7: Japan only
6800E3(H) - User parameter switch 19 (SWUSR_13)
Bit 0: Not used
Bit 1: Journal format
0: The Journal is separated into transmissions and receptions
1: The Journal is separated into G3-1, G3-2, and G3-3 communications Bit 2: Not used
Bit 3: 90° image rotation during B5 portrait TX (This switch is not printed on the user parameter
Service RAM Addresses
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
list.) 0: Off, 1: On
Bit 4: Reduction of sample images on reports to 50% in the main scan and sub-scan directions. (This switch is not printed on the user parameter list.) 0: Technician adjustment (printer switch 0E bits 3 and 4), 1: 50% reduction
Bit 5: Use of A5 size paper for reports (This switch is not printed on the user parameter list.) 0: Off, 1: On
Bits 6 and 7: Not used
6800E4(H) - User parameter switch 20 (SWUSR_14)
Bit 0: Automatic printing of the LAN fax result report 0: Off, 1: On Bit 1: Not used.
Bits 2 to 5: Store documents in memory, which could not be printed from PC fax (LAN fax) driver
Bit 5 | Bit 4 | Bit 3 | Bit 2 | Setting |
0 | 0 | 0 | 0 | 0 min. |
0 | 0 | 0 | 1 | 1 min. |
|
|
|
|
|
1 | 1 | 1 | 0 | 14 min. |
1 | 1 | 1 | 1 | 15 min. |
Bits 6 and 7: Not used.
6800E5(H) - User parameter switch 21 (SWUSR_15)
Bit 0: Print results of sending reception notice request message 0: Disabled (print only when error occurs), 1: Enabled
Bit 1: Respond to e-mail reception acknowledgment request 0: Disabled, 1: Enabled Bit 2: Not used
Bit 3: File format for forwarded folders 0: TIFF, 1: PDF Bit 4: Transmit Journal by E-mail 0: Disabled, 1: Enabled Bit 5: Not used
Bit 6: Network error display 0: Displayed, 1: Not displayed Bit 7: Transmit error mail notification 0: Enabled, 1: Disabled 6800E6(H) - User parameter switch 22 (SWUSR_16) (This switch is not printed on the user parameter list.)
Bit 0: Dial tone detection (PSTN 1) 0: Disabled, 1: Enabled
Bits 1 to 7: Not used
6800E7(H) – User parameter switch 23 (SWUSR_17): Not used
6800E8(H) - User parameter switch 24 (SWUSR_18): Not used
Service RAM Addresses
6800E9(H) - User parameter switch 25 (SWUSR_19)
Bit 0: Not used
Bit 1: Reception mode switch timer 0: Off, 1: On (switching Fax or Fax/Tel) Bit 2: Mode priority switch 0: Fax first, 1: Tel first
Bit 3: Dial in function (Japan Only) Bit 4: Do not Change this Bit.
Bits 5 to 7: Not used
6800EA(H) and 6800EB(H) - User parameter switches 26 and 27 (SWUSR_1A and 1B): Not used
6800EC(H) - User parameter switch 28(SWUSR_1C): Not used
6800ED(H) - User parameter switch 29(SWUSR_1D): Not used
6800EE(H) and 6800EF(H) - User parameter switches 30 and 31 (SWUSR_1E and 1F): Not used
6800F0(H) - User parameter switch 32 (SWUSR_20)
Bit 0: Quotation priority for a destination when there is no destination of the specified type
0: Paper output priority = Priority order: 1. IP-fax destination, 2. Fax Number, 3. E-mail address, 4. Folder
1: Electric putout order = Priority order: 1. E-mail address, 2. Folder, 3. IP-fax destination, 4. Fax number
Bits 1 to 7: Not used
6800F1(H) - User parameter switch 33 (SWUSR_21): Not used
6800F2(H) - User parameter switch 34 (SWUSR_22)
Bit 0: Gatekeeper server used with IP-Fax 0: Disabled, 1: Enabled Bit 1: SIP server used with IP-Fax 0: Disabled, 1: Enabled
Bits 2 to 7: Not used
6800F3(H) - User parameter switch 35 (SWUSR_23)
Redial interval when sending a backup file
6800F4(H) - User parameter switch 36 (SWUSR_24) Maximum number of redials when sending a backup file 6800F5(H) - User parameter switch 37 (SWUSR_25)
Bit 0: Whether to stop sending a backup file if the destination folder becomes full while the machine is sending or waiting to send a fax or the backup file. 0: No, • 1: Yes
Bit 2 and 3: Backup file is printed along with the TX communication failure report when a backup file transmission failure occurs. 00: Do not print, 01: Print first page only, 10: Print whole file
Bit 4: Display the sender's information in the file name of documents that are forwarded to folder destinations. 0: Disabled, 1: Enabled
Bit 5: Limit the file names of documents that are forwarded to folder destinations to plain characters only. 0: Disabled, 1: Enabled
Bit 6: When using the remote fax function, the sub-machine beeps to let you know when it has
Service RAM Addresses
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
printed a received document (If you specify "On", the machine will beep according to the setting of [Panel Key Sound] under [System Settings].) 0: On, 1: Off
Bit 7: Not used
6800F6(H) - User parameter switch 38 (SWUSR_26)
Maximum number of transmissions the machine attempts before determining that a fax cannot be forwarded from a sender (including special senders) to a folder destination
6800F7(H) - User parameter switch 39 (SWUSR_27)
Interval (in minutes) between resend attempts after failing to forward a fax from a sender (including special senders) to a folder destination
6800F8(H) - User parameter switch 40 (SWUSR_28)
Bit 0: When memory space is insufficient, the machine prints and then deletes the oldest faxes, creating memory space for storage of new faxes. 0: Disabled, 1: Enabled
Bit 1 to 7: Not used
6800FD(H) - User parameter switch 45 (SWUSR_2D)
Bit 0 and 1:
Bit 2: File format for files transmitted to e-mail addresses and folders registered as forwarding, destinations of backup file transmission, receivers for Personal Box, or end receivers for Transfer Box. 0: PDF 1: PDF/A
Bit 3:
Bit 4 to 7: Not used
680100 to 68010F(H) - G4 Parameter Switches – Not used 680110 to 68012F(H) - G4 Internal Switches – Not used 680130 to 68016F(H) - Service Switches
680170 to 68017F(H) - IFAX Switches
680180 to 68018F(H) - IP-FAX Switches
680190 to 6801A3(H) - PSTN-1 RTI (Max. 20 characters - ASCII) - See the following note.
6801A4 to 6801B7(H) - PSTN-2 RTI (Max. 20 characters - ASCII)
6801B8 to 6801CB(H) - PSTN-3 RTI (Max. 20 characters - ASCII)
6801CF to 68020E(H) - TTI 1 (Max. 64 characters - ASCII) - See the following note.
68020F to 68024E(H) - TTI 2
68024F to 68028E(H) - TTI 3
68028F to 6802CE(H) - TTI 4
6802CF to 68030E(H) - TTI 5
68030F to 68034E(H) - TTI 6
68034F to 68038E(H) - TTI 7
68038F to 6803CE(H) - TTI 8
6803CF to 68040E(H) - TTI 9
68040F to 68044E(H) - TTI 10
Service RAM Addresses
If the number of characters is less than the maximum (20 for RTI, 32 for TTI), add a stop code (00[H]) after the last character.
68044F(H)
Printing format for TTI 1
0: DOM (Japan), 1:EXP (Export)
680450(H)
Printing format for TTI 2 0: DOM, 1: EXP
680451(H)
Printing format for TTI 3 0: DOM, 1:EXP
680452(H)
Printing format for TTI 4 0: DOM, 1:EXP
680453(H)
Printing format for TTI 5 0: DOM, 1:EXP
680454(H)
Printing format for TTI 6 0: DOM, 1:EXP
680455(H)
Printing format for TTI 7 0: DOM, 1:EXP
680456(H)
Printing format for TTI 8 0: DOM, 1:EXP
680457(H)
Printing format for TTI 9 0: DOM, 1:EXP
680458(H)
Printing format for TTI 10 0: DOM, 1: EXP
680459 to 68046C(H) - PSTN-1 CSI (Max. 20 characters - ASCII)
68046D to 680480(H) - PSTN-2 CSI (Max.20 characters - ASCII)
680481 to 680494(H) - PSTN-3 CSI (Max.20 characters - ASCII)
680495(H) - Number of PSTN-1 CSI characters (Hex) 680496(H) - Number of PSTN-2 CSI characters (Hex) 680497(H) - Number of PSTN-3 CSI characters (Hex) 6804C6(H) - Memory Lock ID (BCD)
Service RAM Addresses
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
6804D2 to 6804D9(H) - Last power off time (Read only)
6804D2(H) - 01(H) - 24-hour clock, 00(H) - 12-hour clock (AM), 02(H) - 12-hour clock (PM) 6804D3(H) - Year (BCD)
6804D4(H) - Month (BCD)
6804D5(H) - Day (BCD)
6804D6 (H) – Hour
6804D7 (H) – Minute 6804D8(H) – Second
6804D8 (H) - 00: Monday, 01: Tuesday, 02: Wednesday, ///, 06: Sunday 6804E6(H) - Optional equipment (Read only – Do not change the settings) Bit 0: Page Memory 0: Not installed, 1: Installed
Bit 1: SAF Memory (4M) 0: Not installed, 1: Installed Bit 2: SAF Memory 0: Not installed, 1: Installed
Bits 3 to 7; Not used
6804E7(H) - Optional equipment (Read only – Do not change the settings) Bits 0 to 3: Not used
Bit 4: G3-2 0: Not installed, 1: Installed
Bit 5: G3-3 0: Not installed, 1: Installed
Bit 6 and 7: Not used
6804EE(H) - Machine code (Check ram 3) 680500(H) - Start address of G3 table for G3-1 680600(H) - Start address of G3 table for G3-2 680700(H) - Start address of G3 table for G3-3
680800 to 68081F(H) - Service station’s fax number (SP3-101) 680820 to 680829(H) - Own fax PABX extension number – Not used 68082A to 680833(H) - Own fax number (PSTN) – Not used
680834 to 680847(H) - Own fax number (ISDN G4) – Not used
680848 to 680853(H) - The first subscriber number (ISDN G3) – Not used 680854 to 68085F(H) - The second subscriber number (ISDN G3) – Not used 680860 to 68086B(H) - The first subscriber number (ISDN G4) – Not used 68086C to 680877(H) - The second subscriber number (ISDN G4) – Not used
6808A0 to 6808B7(H) - G4TID registered information (Max.24 characters - ASCII)
6808B8 to 6808CB(H) - ISDN CSI (Max.20 characters - ASCII)
6808CC(H) - Number of ISDN CSI characters (Hex)
6808D1 to 6808D4(H) - ISDN G3 sub address registered information
6808D5 to 6808D8(H) - G4 sub address registered information
6808DE to 6808E2 – Option G3 board (G3-2) ROM information (Read only) 6808DE(H) - Suffix (BCD)
6808DF(H) - Version (BCD)
Service RAM Addresses
6808E0(H) - Year (BCD)
6808E1(H) - Month (BCD)
6808E2(H) - Day (BCD)
6808E3 to 6808E7 – Option G3 board (G3-3) ROM information (Read only) 6808E3(H) - Suffix (BCD)
6808E4(H) - Version (BCD)
6808E5(H) - Year (BCD)
6808E6(H) - Month (BCD)
6808E7(H) - Day (BCD)
6808E8(H) - G3-1 Modem ROM version (Read only) 6808EA(H) - G3-2 Modem ROM version (Read only) 6808EC(H) - G3-3 Modem ROM version (Read only) 6808F8(H) - Number of multiple sets print (Read only) 68094E(H) - Time for economy transmission (Not used) 68094F(H) - Time for economy transmission (Not used) 68096A(H) - Transmission monitor volume 00 - 07(H) 68096B(H) - Reception monitor volume 00 - 07(H) 68096C(H) - On-hook monitor volume 00 - 07(H) 68096D(H) - Dialing monitor volume 00 - 07(H) 68096E(H) - Buzzer volume 00 - 07(H)
68096F(H) - Beeper volume 00 - 07(H) 680980(H) - Machine code (Check ram 4) 680982(H) - Machine serial number (ASCII)
687178 to 68717B(H) - Transmission counter (Max.24 characters - ASCII) 68717C to 68717F(H) - Reception counter (Max.24 characters - ASCII) 6871E8 to 6871EB(H) - Mail transmission counter (Max.24 characters - ASCII) 6871EC to 6871EF(H) - Mai reception counter (Max.24 characters - ASCII) 6A6DEE(H) to 6A70ED(H) - SIP server address (Read only)
6A6DEE(H) - Proxy server - Main (Max. 128 characters - ASCII) 6A6E6E(H) - Proxy server - Sub (Max. 128 characters - ASCII) 6A6EEE(H) - Redirect server - Main (Max. 128 characters - ASCII) 6A6F6E(H) - Redirect server - Sub (Max. 128 characters - ASCII) 6A6FEE(H) - Registrar server - Main (Max. 128 characters - ASCII) 6A706E(H) - Registrar server - Sub (Max. 128 characters - ASCII)
6A70EE(H) - Gatekeeper server address - Main (Max. 128 characters - ASCII) 6A716E(H) - Gatekeeper server address - Sub (Max. 128 characters - ASCII) 6A71EE(H) - Alias Number (Max. 128 characters - ASCII)
6A726E(H) - SIP user name (Max. 128 characters - ASCII)
6A72EE(H) - SIP digest authentication password (Max. 128 characters - ASCII)
Service RAM Addresses
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
FAX OPTION M19 (D3DV) FOR D243/D244
6A736E(H) - Gateway address information (Max. 7100 characters - ASCII)
6A8F2A(H) - NGN initial setting method 0: Simple, 1: Manual
6A8F2B(H) - SIP digest authentication user name (Max. 128 characters - ASCII)
6A8FAB(H) - NGN-SIP domain name (Max. 64 characters - ASCII) 6A8FEB(H) - NGN-home gateway address (Max. 128 characters - ASCII) 6A906C(H) - Stand-by port number for H.323 connection
6A906E(H) - Stand-by port number for SIP connection
6A9070(H) - RAS port number
6A9072(H) - Gatekeeper port number 6A9074(H) - Port number of data waiting for T.38 6A9076(H) - Port number of SIP server
6A9078(H) - Priority for SIP and H.323 0: H.323, 1: SIP
6A9079(H) - SIP function 0: Disabled, 1: Enabled
6A907A(H) - H.323 function 0: Disabled, 1: Enabled
6A907B(H) - SIP digest authentication function 0: Disabled, 1: Enabled
6B3AE4(H) - 6B3B04 (H) - Dial tone detection parameter (Max. 11 x 3 lines)
This initializes following order. [0x04, 0x40, 0x03, 0x60, 0x64, 0xf4, 0x01,0x64, 0x04, 0xc8, 0x00]
6B3AE4(H) – Dial tone detection frequency – Upper limit (High) Defaults: NA: 06, EU: 06, ASIA: 06
6B3AE5(H) – Dial tone detection frequency – Upper Limit (Low) Defaults: NA: 50, EU: 50, ASIA: 50
6B3AE6(H) – Dial tone detection frequency – Lower Limit (High) Defaults: NA: 03, EU: 02, ASIA: 02
6B3AE7(H) – Dial tone detection frequency – Lower Limit (Low) Defaults: NA: 60, EU: 90, ASIA: 90
6B3AE8(H) –Dial tone detection waiting time (20 ms) Defaults: NA: 64, EU 64, ASIA: 64
6B3AE9 to 6B3AEA – Dial tone detection monitoring time (20 ms) Defaults
Area | 6B35A9 | 6B35AA |
NA | F4 | 01 |
EU | F4 | 01 |
ASIA | F4 | 01 |
Service RAM Addresses
6B3AEB(H) – Dial tone detect judge time (20 ms) Defaults: NA: 64, EU: 1B, ASIA: 32
6B3AEC(H) – Dial tone disconnect permission time (20 ms) Defaults: NA: 11, EU: 0F, ASIA: 11
