HOME PAGE | < Previous | Contents | Next >
1.3.2 POSTSCRIPT 3 UNIT (D641)
Unplug the main machine power cord before you do the following procedure.
2. Turn the SD-card label face to the rear of the machine. Then push it slowly into Slot 1 (Upper Slot) [A] until you hear a click.
3. Attach the controller cover 
x 2).
4. Attach the "Adobe PostScript 3" decal [A] to the front door.
5. Make sure that the machine can recognize the option. 
p.30 "Check All Connections")