PRINTER/SCANNER INSTALLATION

1.2.3 PRINTER/SCANNER INSTALLATION

 Turn off the main power switch and disconnect the power supply cord.

Printer Scanner Unit Type 5002 (D641)

2. Connect the two harnesses to the HDD unit [A] x 2).

3. Install the connecting board unit [A] on the HDD unit [B] x 2).

Printer and P/S Options (Basic Models)

4. Connect the two harnesses from the HDD unit to the connecting board [A] x 2).

5. Install the HDD unit [A] on the controller board unit x3).

6. Install the 512 MB memory [A].

Printer and P/S Options (Basic Models)

7. Reinstall the controller board.

Printer Scanner Unit Type 5002 (D641)

8. Remove the controller cover [A].

9. Insert the Printer/Scanner SD card in SD card Slot 1 (Upper Slot) [A].

10. Reattach the cover.

11. Attach the supplied ferrite core [A] at the machine end of the Ethernet cable.