HOME PAGE | < Previous | Contents | Next >
Booklet Finisher & Finishers (B803/B805/ D373/D374/ D636/D637)
Booklet Finisher & Finishers (B803/B805/ D373/D374/ D636/D637)
Booklet Finisher & Finishers (B803/B805/ D373/D374/ D636/D637)
2.9 FINISHER JAM DETECTION
Display | Mode | Jam | What It Means |
R1 to R3 | Proof Shift Staple | Finisher entrance sensor late | After main machine exit sensor goes OFF, finisher entrance sensor does not go ON even after enough time to feed 450 mm. |
Finisher entrance sensor lag | After finisher entrance sensor goes ON, it does not go OFF after enough time to feed a sheet 1.5 times its length has elapsed. | ||
R3 | Proof | Proof exit sensor late | After finisher entrance sensor goes ON, proof exit sensor does not go ON even after enough time to feed 450 mm. |
Proof exit sensor lag | After finisher entrance sensor goes OFF, proof exit sensor does not go OFF even after enough time to feed 450 mm. |
Finisher Jam Detection
Display | Mode | Jam | What It Means |
R4 | Shift | Upper tray exit sensor late | After finisher entrance sensor goes ON, upper tray exit sensor does not go ON even after enough time to feed 485 mm. |
Upper tray exit sensor lag | After finisher entrance sensor goes OFF, upper tray exit sensor does not go OFF even after enough time to feed 650 mm. | ||
R5 to R7 | Staple | Pre-stack tray exit sensor lag | After finisher entrance sensor goes ON, pre-stack tray exit sensor does not go ON even after enough time to feed 650 mm. |
Pre-stack tray exit sensor late | After finisher entrance sensor goes ON, pre-stack tray exit sensor does not go OFF even after enough time to feed 1650 mm. | ||
R8 to R12 | Booklet Staple (B700 Only) | Fold unit entrance sensor late (S26) | The fold unit entrance sensor goes not go ON after enough time has elapsed to feed 1.5 times the length of the stack after the leading edge of the stack reaches the stack present sensor (S32). |
Fold unit exit sensor late (S31) | The fold unit exit sensor does not go ON after enough time has elapsed for the stack to feed 1.5 times its length from the fold position. | ||
Fold unit exit sensor lag (S31) | After the fold unit exit sensor goes ON, it does not go OFF after enough time has elapsed to feed 442.9 mm. |
R EVI SIO N HIS TORY | ||
Page | Date | Added/ Updated/ New |
None | ||
R EVI SIO N HIS TORY | ||
Page | Date | Added/ Updated/ New |
None | ||
R EVI SIO N HIS TORY | ||
Page | Date | Added/ Updated/ New |
None | ||