HOME PAGE | < Previous | Contents | Next >
Punch Unit Installation (D570)
2.11 PUNCH UNIT INSTALLATION (D570)
The Punch Unit D570 can be installed in the 3000/2000-Sheet (Booklet) Finisher D636/D637.
2.11.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No. | Description | Q'ty |
1 | Punch-out Waste Unit | 1 |
2 | Slide Drive Unit | 1 |
3 | Punch Waste Hopper | 1 |
4 | Wire harness: short-circuit | 1 |
5 | Screws (M3 x 6) | 5 |
6 | Side-to-Side Detection Unit | 1 |
7 | Punching Unit | 1 |