6

Reconstruction time for the first line in receive mode

0: 6 s 1: 12 s

When the sending terminal is controlled by a computer, there may be a delay in receiving page data after the local machine accepts set-up data and sends CFR. This is outside the T.30 recommendation. But, if this delay occurs, set this bit to 1 to give the sending machine more time to send data. Refer to error code 0-20.

ITU-T T.30 recommendation: The first line should come within 5 s of CFR.

7

Not used

Do not change the settings.

G3-2 Switch 0B- Not used (do not change the settings)

G3-2 Switch 0C- Not used (do not change the settings)