HOME PAGE | < Previous | Contents | Next >
1200-sheet LCT Installation (D631)
2.6.2 INSTALLATION PROCEDURE
Unplug the main machine power cord before starting the following procedure.
Installation
Installation
Installation
The Paper Tray Unit (D580) or LCT 2000-sheet (D581) must be installed before installing this 1200-sheet LCT.
1. Unpack the LCT and remove the tapes.
2. Remove the stand covers [A].
3. Release the locks [B] of the front and rear caster stands.
4. Remove the caster stands [C].
5. Remove the paper path cover [A], connector cover [B] and six hole covers [C].
1200-sheet LCT Installation (D631)
6. Insert the joint pins [A].
7. Attach the front [B] and rear brackets [C]. 
x2 each)
8. Pull out the front and rear rails [A], and then hang them on each bracket [B].
9. Connect the LCT cable [C] to the main machine.
10. Slide the LCT [D] into the main machine.
11. Make sure that the front and rear sides of the LCT are closely attached to the main machine.