HOME PAGE | < Previous | Contents | Next >
4.13 PAPER FEED-OUT MECHANISM
[C]
]
After the copies have been stapled, the stack feed-out motor [A] starts. The pawl
[B] on the stack feed-out belt [C] transports the set of stapled copies up and feeds it to the shift roller. The shift roller takes over stack feed-out after the leading edge reaches this roller.
Just before the stapled stack passes through the lower tray exit sensor, the stack- feed-out motor turns off until the shift rollers have completely fed the stack out to the lower tray. Then, the stack-feed-out motor turns on again until the pawl [B] actuates the stack feed-out belt home position sensor [D].
R EVI SIO N HIS TORY | ||
Page | Date | Added/ Updated/ New |
None |
R EVI SIO N HIS TORY | ||
Page | Date | Added/ Updated/ New |
None |
R EVI SIO N HIS TORY | ||
Page | Date | Added/ Updated/ New |
None |