HOME PAGE | < Previous | Contents | Next >
STAPLER UNIT MOVEMENT MECHANISM
4.12 STAPLER UNIT MOVEMENT MECHANISM
[B]
1000-Sheet Finisher SR790/SR3090
B408/D588
1000-Sheet Finisher SR790/SR3090
B408/D588
1000-Sheet Finisher SR790/SR3090
B408/D588
The stapler motor moves the stapler [A] from side to side. After the start key is pressed, the stapler moves from its home position to the stapling position.
If two-staple-position mode is selected, the stapler moves to the front stapling position first, then moves to the rear stapling position. However, for the next copy set, it staples in the reverse order (at the rear side first, then at the front side).
After the job is completed, the stapler moves back to its home position. The stapler HP sensor [B] detects this.