HOME PAGE | < Previous | Contents | Next >
Appendix: Service Program Mode Tables
Appendix: Service Program Mode Tables
Appendix: Service Program Mode Tables
1000-Sheet Finisher (D588)
6139 | Bit | Description | Reading | |
0 | 1 | |||
001 | Entrance Sensor | Paper detected | No paper detected | |
002 | Shift Exit Sensor (Lower Tray Exit Sensor) | No paper detected | Paper detected | |
003 | Staple Entrance Sensor (Stapler Tray Entrance Sensor) | Paper detected | No paper detected | |
004 | Staple Moving HP Sensor (Stapler HP Sensor) | Not HP | HP | |
005 | Jogger HP Sensor (Jogger Fence HP Sensor) | Not HP | HP | |
006 | Stack Feed-out Belt HP Sensor | HP | Not HP | |
007 | Staple Tray Paper Sensor | No paper detected | Paper detected | |
008 | Staple Rotation Sensor (Staple Rotation HP Sensor) | Not HP | HP | |
009 | Staple Sensor | Staple detected | No staple detected | |
010 | Staple READY Detection | Staple detected | No staple detected | |
011 | Exit Guide Plate HP (Exit Guide Plate HP Sensor) | Not HP | HP | |
012 | Shift HP Sensor | Not HP | HP | |
Input Check
013 | Paper Sensor (Stack Height Sensor) | No output tray detected | Output tray detected |
014 | Tray Lower Sensor (Lower Tray Lower Limit Sensor) | Lower limit | Not lower limit |
015 | Proof Full Sensor (Paper Limit Sensor) | Not full | Full |