HOME PAGE | < Previous | Contents | Next >
3.9.2 OPTIONS
3000/2000-Sheet (Booklet) Finisher (D636/D637)
6140 | Bit | Description | Reading | |
0 | 1 | |||
001 | Entrance Sensor | No paper detected | Paper detected | |
002 | Proof Exit Sensor | No paper detected | Paper detected | |
003 | Proof Full Detection Sensor | Not Full | Full | |
004 | Upper Tray Exit Sensor | No paper detected*1 | Paper detected*1 | |
005 | Staple Exit Sensor | No paper detected | Paper detected | |
006 | Shift Roller HP Sensor | Not HP | HP | |
007 | Shift Exit Sensor | No paper detected | Paper detected | |
008 | Exit Guide Plate HP Sensor | Not HP | HP | |
009 | Lower Tray Height Sensor | No paper detected | Paper detected | |
010 | Upper Tray Height Sensor | No paper detected | Paper detected | |
011 | Upper Tray Full Sensor | Not Full | Full | |
012 | Stack Roller HP Sensor | Not HP | HP | |
013 | Jogger HP Sensor | Not HP | HP | |
014 | Feed Out Belt HP Sensor | HP | Not HP | |
015 | Stapling Tray Paper Sensor | No paper detected | Paper detected | |
016 | Corner Stapler HP Sensor | Not HP | HP | |
017 | Stapler Rotation HP Sensor | Not HP | HP | |
018 | Upper Tray Limit SW | Not Limit | Limit | |
019 | Door Switch | Closed | Open | |
Appendix: Service Program Mode Tables
Appendix: Service Program Mode Tables
Appendix: Service Program Mode Tables
Input Check
6140 | Bit | Description | Reading | |
0 | 1 | |||
020 | Corner Stapler Operation | Not HP | HP | |
021 | Staple Detection | No staple detected | Staple detected | |
022 | Staple Dip Detection | No staple detected | Staple detected | |
023 | Punch Movement HP Sensor | Not HP | HP | |
024 | Paper Position Slide HP Sensor | Not HP | HP | |
025 | Paper Position Sensor | No paper detected | Paper detected | |
026 | Punch Full Sensor | Not Full | Full | |
027 | Punch HP Sensor | Not HP | HP | |
028 | Punch DIP SW 1 | See *1 | ||
029 | Punch DIP SW 2 | See *1 | ||
030 | Stack Junction Gate HP Sensor | Not HP | HP | |
031 | Stack Present Sensor | No paper detected | Paper detected | |
032 | Clamp Roller HP Sensor | Not HP | HP | |
033 | Fold Entrance Sensor | No paper detected | Paper detected | |
034 | Bottom Fence HP Sensor | Not HP | HP | |
035 | Fold Cam HP Sensor | Not HP | HP | |
036 | Fold Plate HP Sensor | Not HP | HP | |
037 | Fold Unit Exit Sensor | No paper detected | Paper detected | |
038 | Lower Tray Full Sensor: Front | No paper detected*2 | Paper detected*2 | |
039 | Lower Tray Full Sensor: Rear | No paper detected*2 | Paper detected*2 | |
040 | Booklet Stapler 1: Operation | Not HP | HP | |
041 | Booklet Stapler 1: Staple In (Front) | No staple detected | Staple detected | |
Input Check
6140 | Bit | Description | Reading | |
0 | 1 | |||
042 | Booklet Stapler 1: Staple In (Leading Edge) | No staple detected | Staple detected | |
043 | Booklet Stapler 1: Operation (Rotation/Rear) | Not HP | HP | |
044 | Booklet Stapler 1: Staple In (Rear) | No staple detected | Staple detected | |
045 | Booklet Stapler 1: Staple In (Leading Edge/Rear) | No staple detected | Staple detected | |
046 | Upper Tray Full Sensor: 3000 | Not Full | Full | |
*1: Combination of DIP SW 1 and SW 2
DIP SW 1 | DIP SW 2 | Punch Type |
0 | 0 | Japan |
1 | 0 | Europe |
0 | 1 | North America |
1 | 1 | North Europe |
*2: Please refer to "Lower Tray (D637 Only)" in the Service Manual for the "3000/2000 (Booklet) Finisher".