HOME PAGE | < Previous | Contents | Next >
Copy Adjustments: Printing/Scanning
Rev. 12/27/2012
4.16.4 ADF
Registration
1. Make a temporary test chart as shown above using A3/DLT paper.
2. Place the temporary test chart on the ADF and make a copy from one of the feed stations.
3. Check the registration, and adjust using the following SP modes if necessary.
SP No. | Specification | |
Side-to-side: 1st side | SP6-006-1 | 0.0 mm ±3 mm |
Side-to-side: 2nd side | SP6-006-2 | |
Leading Edge | SP6-006-3 | 0.0 mm ±5 mm |
Leading Edge: 1st side | SP6-006-5 | 0.0 mm ±3 mm |
Leading Edge: 2nd side | SP6-006-6 | 0.0 mm ±2.5 mm |
Trailing Erase edge: | SP6-006-7 | 0.0 mm ±10.0 mm |
D129/D130 4-116 SM