IPU

When installing the new BCU

1. Remove the NVRAM from the old BCU.

2. Install the NVRAM on the new BCU after you replace the BCU.

3. Reassemble the machine.

4. Turn on the main power switch. 5. "SC995-01" occurs.

6. Enter the serial number with SP5-811-004.

7. Turn the main power switch off and on.

 Make sure you print out the SMC reports ("SP Mode Data" and "Logging Data") before you replace the NVRAM.

 Keep NVRAM away from any objects that can cause static electricity. Static electricity can damage NVRAM data.

4.15.7 IPU

1. Controller box p.4-101 "Mother Board")

2. IPU[[A] x 6, x all)

Replacement and Adjustment