Latest activity

5431 External Auth User Preset 010 Tag [0 or 1 / 1 / -] 0: Not permit, 1: Permit Turns on or off the tag copy permission for...

004 Book: Right [0 to 3 / 0 / 0.1 mm] 005 ADF: Leading Edge [0 to 3 / 0 / 0.1 mm] 007 ADF: Right [0 to 3 / 0 / 0.1 mm] 008...

Rev. 8/21/2012 PM Tables 1-Bin Tray Unit Appendix: Preventive Maintenance Tables D632 EM Note 1-Bin Tray Unit...

876 D Log Data Error An error is detected in the handling of the log data at power on or during machine operation. This can be...

442 D Transfer belt contact motor error The transfer belt HP sensor detects incorrect movement of the transfer belt after the...

6140 Bit Description Reading 0 1 042 Booklet Stapler 1: Staple In (Leading Edge/Front) No staple detected Staple...

806x 13 Perfect-Bind Perfect Binder Not Used 806x 14 Ring-Bind Ring Binder Not Used 8071 T:Jobs/PGS [0 to 9999999 / 0 /...

Thank for post

062 Complexity Option 1 Use this SP to set the conditions for password entry to access the local address book. Specifically, this SP...

5071 Set Bypass Paper Size Display 001 Turn on or off the paper size confirmation pop-up on the LED. This pop-up prevents...

Blank Margin If the leading edge/side-to-side registration cannot be adjusted within specifications, adjust the leading/left side...

FUSING FUSING UNIT Turn off the main switch and wait until the fusing unit cools down before beginning any of the procedures in...

Rev. 09/11/2012 Exterior Covers 4.3.8 INNER TRAY Left cover ( p.4-4) Upper inner cover ( p.4-3 "Front Door, Upper and Lower Inner...

Installation Release the heater relay connector [5] x 1). Connect the heater relay connector to the connector [6] (front side) of...

Turn the SD card label face to the rear of the machine. Then push it slowly into Slot 2 (Lower Slot) until you hear a click. Turn on the...