Reply to thread

Message: <blockquote data-quote="John" data-source="post: 21" data-attributes="member: 2">ADF Feed Motor<img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_001.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ul> <li data-xf-list-type="ul">ADF Feed Motor [A] drives the pick-up , feed belt [C], separation [D] and skew correction rollers [E]. ADF Transport Motor and ADF Inverter Motor <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_002.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> [*]ADF Transport Motor [A] drives the registration roller , transport roller [C] and exit roller [D]. [*]ADF Inverter Motor [E] drives the Inverter Roller [F]. ARDF DF3010/ DF3070 (B802/D630) <ol style="margin-left: 20px"> <li data-xf-list-type="ol"> <h4>BASIC OPERATION</h4> <ol> <li data-xf-list-type="ol"> <h4>ORIGINAL SIZE DETECTION</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_003.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> The original size detection mechanism consists of the five original width sensors ([A]: Width Sensor SS, : Width Sensor S, [C] Width Sensor M, [D]: Width Sensor L, [E]: Width Sensor LL) and three original length sensors ([F]: Length Sensor S, [G]: Length Sensor M, [H]: Length Sensor L). Based on the combined output of the length sensors and the width sensors, the machine can detect the size of the original. This integrated detection mechanism is detailed in the table below. <table style='width: 100%'><tr><td> Size</td><td>Width Sensor</td><td>Length Sensor</td><td>Area</td><td></td><td></td><td></td><td></td><td></td><td></td><td></td></tr><tr><td>SS</td><td>S</td><td>M</td><td>L</td><td>LL</td><td>S</td><td>M</td><td>L</td><td>LT</td><td>A/B</td><td></td></tr><tr><td>A3/SEF (297 x 420)</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>O</td><td>O</td></tr><tr><td>B4/SEF (257 x 364)</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>O</td></tr><tr><td>A4/SEF (210 x 297)</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>ON</td><td>-</td><td>O</td><td>O</td></tr><tr><td>A4/LEF (297 x 210)</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>O</td><td>O</td></tr><tr><td>B5/SEF (182 x 257)</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>O</td></tr><tr><td>B5/LEF (257 x 182)</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>O</td></tr><tr><td>A5/SEF (148 x 210)</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>O</td></tr></table> <table style='width: 100%'><tr><td>A5/LEF (210 x 148)</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>O</td></tr><tr><td>11" x 17"/SEF (DLT)</td><td> ON</td><td> ON</td><td> ON</td><td> ON</td><td> -</td><td> ON</td><td> ON</td><td> ON</td><td> O1</td><td> O5</td></tr><tr><td>11" x 15"/SEF</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>ON</td><td>ON</td><td>ON</td><td>1</td><td>-</td></tr><tr><td>10" x 14"/SEF</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>O</td><td>-</td></tr><tr><td>8.5" x 14"/SEF (LG)</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>ON</td><td>ON</td><td>O2</td><td>-</td></tr><tr><td>8.5" x 13"/SEF (F4)</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>ON</td><td>ON</td><td>2</td><td>O</td></tr><tr><td>8.25" x 13"/SEF</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>-</td></tr><tr><td>8" x 13"/SEF (F)</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>-</td></tr><tr><td>8.5" x 11"/SEF (LT)</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>-</td><td>-</td><td>O3</td><td>O6</td></tr><tr><td>8.5" x 11"/LEF (LT)</td><td>ON</td><td>ON</td><td>ON</td><td>On</td><td>-</td><td>-</td><td>-</td><td>-</td><td>O4</td><td>O7</td></tr><tr><td>7.25" x 10.5"/SEF (US EXE)</td><td> ON</td><td> ON</td><td> -</td><td> -</td><td> -</td><td> ON</td><td> -</td><td> -</td><td> O</td><td> -</td></tr><tr><td>10.5" x 7.25"/SEF (US EXE)</td><td> ON</td><td> ON</td><td> ON</td><td> ON</td><td> -</td><td> -</td><td> -</td><td> -</td><td> 4</td><td> -</td></tr><tr><td>10" x 8"/SEF</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>-</td><td>-</td><td>3</td><td>-</td></tr><tr><td>5.5" x 8.5"/SEF (HLT)</td><td> -</td><td> -</td><td> -</td><td> -</td><td> -</td><td> -</td><td> -</td><td> -</td><td> O</td><td> -</td></tr><tr><td>5.5" x 8.5"/LEF (HLT)</td><td> ON</td><td> ON</td><td> -</td><td> -</td><td> -</td><td> -</td><td> -</td><td> -</td><td> O</td><td> -</td></tr><tr><td>267 mm x 390 mm</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>5</td></tr><tr><td>195 mm x 267 mm</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>6</td></tr><tr><td>267 mm x 195 mm</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td><td>-</td><td>-</td><td>-</td><td>-</td><td>-</td><td>7</td></tr></table> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_004.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_005.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_006.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_007.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_008.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_009.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_010.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Symbols O: Yes (Default), <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_011.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" />: Yes (Can select this with SP mode), ON: Paper present, LT: North America, A/B: Europe, Asia <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_012.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> ARDF DF3010/ DF3070 (B802/D630) <ul> <li data-xf-list-type="ul">For <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_013.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" />" mark, which has superscripted number, it is possible to change the original detection size with SP6-016. For example, instead of LT (O3), the machine can be set up to detect 10” x 8” <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_014.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" />3).</li> <li data-xf-list-type="ul">The F size can be selected with SP5-126. The default is 8.5" x 13"</li> <li data-xf-list-type="ul">The machine cannot detect more than one size of original in the same job. </li> </ul>[*] <h4>MIXED ORIGINAL SIZE MODE</h4> This section explains what happens when the user selects mixed original size mode. Because this ARDF is a sheet-through document feeder, the method for original document width detection is the same as when the originals are the same size, but the document length detection method is different. Therefore, the scanning speed is slightly slower. Document length detection From when the skew correction sensor switches on until it switches off, the CPU counts the transport motor pulses. The number of pulses determines the length of the original. Feed-in cycle When the original size for the copy modes listed below cannot be determined, the image cannot be correctly scaled (reduced or enlarged) or processed until the original’s length has been accurately detected. The length must be determined before the image is scanned. <table style='width: 100%'><tr><td>Auto Reduce/Enlarge</td></tr><tr><td>Centering</td></tr><tr><td>Erase Center/Border</td></tr><tr><td>Booklet</td></tr><tr><td>Image Repeat</td></tr></table> The originals follow this path: <ol> <li data-xf-list-type="ol">Length detection <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_015.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Scanning glass <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_016.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Inverter table</li> <li data-xf-list-type="ol">Inverter table <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_017.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Scanning glass <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_018.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Inverter table (restores the original order)</li> <li data-xf-list-type="ol">Inverter table <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_019.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Scanning glass (image scanned) <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_020.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Exit tray Normal feed-in</li> </ol>In a copy mode other than those listed above, when the reduction/enlargement ratio has been determined, the originals are scanned normally. In order to store the scanned images, a large area of memory (the detected original width x 432 mm length) is prepared. Next, only the portion of the image up to the detected original length is read from memory and printed. [*] <h4>PICK-UP AND SEPARATION</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_021.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> The original is set with the image facing up. The original pushes actuator and the original set sensor is activated. After pressing the start button, the pick-up motor is activated and the original feed unit [A] moves down. At the same time, the ADF feed motor is activated and the pick-up roller feeds original to the feed belt [C]. After being fed from feed belt [C], the topmost sheet is separated from the stack by the separation roller [D] and sent to the skew correction roller. The mechanism is an FRR system, consisting of the original feed belt [C] and separation roller [D]. ARDF DF3010/ DF3070 (B802/D630) [*] <h4>SKEW CORRECTION</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_022.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> When an original is fed into the feeder, the feed motor [A] rotates forwards. At this time, the feed belt turns but the skew correction roller does not, because these rollers have a one-way gear. (If the ADF feed motor rotates forward, the feed belt is moved. If the ADF feed motor rotates in reverse, the skew correction roller is moved.) As a result, when the leading edge of the paper gets to the skew correction roller, skew in the original is removed. A short time after the leading edge of the original turns on the skew correction sensor [C], the feed motor [A] turns off and rotates in reverse. At this time, the skew correction roller and the feed belt [D] both turn, and original feed continues. The registration roller also has the same skew correction mechanism, but only for small size originals (6, A5 or HLT). This function can be effective for all size paper with SP6-020-001. [*] <h4>SLIP DETECTION</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_023.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> [A]: Separation sensor : Skew correction sensor These two sensors are used to measure the amount of slippage and to correct for this. The machine measures the time it takes for the original to get to the separation sensor [A] after the [Start] key is pressed. </li> </ol> </li> </ol> [*]If the original arrives at the correct time, it feeds normally. [*]If the original arrives late, the machine enters the slip mode. </li> </ul>In the slip mode, the machine measures the time for the leading edge of the original to move from the separation sensor to the skew correction sensor .The machine uses this time to adjust the length of time that the entrance roller stays off to correct skew. This stops feed for enough time for the original to be in the correct position for feeding.ARDF DF3010/ DF3070 (B802/D630)<ol style="margin-left: 20px"> <li data-xf-list-type="ol"> <h4>ORIGINAL TRANSPORT AND EXIT</h4> Single-Sided Originals <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_024.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> The feed motor feeds the separated original to the skew correction roller [A] at maximum speed. After skew correction, the feed and transport motors feed the original through the scanning area at a lower speed (the scanning area contains the original exposure guide and DF exposure glass [C]). After scanning, the original is fed out by the transport roller [D] and exit roller [E]. Double-Sided Originals <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_025.jpg" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> After skew correction, the ADF feed and transport motors drive the skew correction roller [A], registration roller , transport roller [C] and the exit roller [D]. The front side of the original is then scanned. When the original exit sensor [E] detects the leading edge of the original, the junction gate solenoid is activated and the junction gate [F] opens. The original is then transported towards the inverter table. Soon after the trailing edge of the original passes the exit sensor, the junction gate solenoid switches off and the junction gate [F] is closed. When the original has been fed onto the inverter table, the ADF inverter motor switches on. The original is then fed by the inverter roller [G], and then by the skew correction roller [A] and registration roller to the scanning area (where the reverse side will be scanned). <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_026.jpg" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> The original is then sent to the inverter table [H] again to be turned over. This is done so that the duplex copies will be properly stacked front side down in the exit tray in the correct order. Original Sensor During one-to-one copying, copy paper is fed to the skew correction roller in advance (while the original is still being scanned), to increase the copy speed. The original set sensor monitors the stack of originals in the feeder, and detects when the trailing edge of the last page has been fed in. The main CPU then stops the copier from feeding an unwanted extra sheet of copy paper. ARDF DF3010/ DF3070 (B802/D630) [*] <h4>CONDITIONS FOR JAM DETECTION</h4> </li> </ol> <table style='width: 100%'><tr><td>Jam Mode</td><td>Detection Timing</td></tr><tr><td> Initial</td><td>When turning on the machine, the skew correction sensor, separation sensor, registration sensor or exit sensor detects an original.</td></tr><tr><td>When the cover is closed or DF is down, the skew correction sensor, separation sensor, registration sensor or exit sensor detects an original.</td><td></td></tr><tr><td>When the cover is opened or DF is lifted up, the skew correction sensor, separation sensor, registration sensor or exit sensor detects an original.</td><td></td></tr><tr><td> Sensor stays on too long</td><td>The skew correction sensor does not turn off even if the original was fed by the maximum length of the original + 150 mm after the skew correction sensor turned on.</td></tr><tr><td>The registration sensor does not turn off even if the original was fed by its length x 1.5 after the registration sensor turned on.</td><td></td></tr><tr><td>The exit sensor does not turn off even if the original was fed by its length x 1.5 after the exit sensor turned on.</td><td></td></tr><tr><td> Sensor does not come on</td><td>The separation sensor does not turn on even if the original was fed by transport path length x 1.5.</td></tr><tr><td>The skew correction sensor does not turn on even if the original was fed by transport path length x 1.5.</td><td></td></tr><tr><td>The registration sensor does not turn on even if the original was fed by transport path length x 1.5 after the skew correction sensor turned on.</td><td></td></tr><tr><td>The exit sensor does not turn on even the original was fed by transport path length x 1.5 after the skew correction sensor turned on.</td><td></td></tr></table><h3>3. SERVICE TABLES</h3><h4>3.1 DIP SWITCHES</h4> <table style='width: 100%'><tr><td>DIP-SW</td><td> Function</td><td></td><td></td><td></td></tr><tr><td>1</td><td>2</td><td>3</td><td>4</td><td></td></tr><tr><td>0</td><td>0</td><td>0</td><td>0</td><td>Normal operating mode (Default)</td></tr><tr><td>0</td><td>0</td><td>0</td><td>1</td><td>Free run: With original: One-sided mode: 100% speed</td></tr><tr><td>0</td><td>0</td><td>1</td><td>0</td><td>Free run: With original: Two-sided mode: 100% speed</td></tr><tr><td>0</td><td>0</td><td>1</td><td>1</td><td>Free run: No original: One-sided mode: 100% speed</td></tr><tr><td>0</td><td>1</td><td>0</td><td>0</td><td>Free run: No original: Two-sided mode: 100% speed</td></tr><tr><td>0</td><td>1</td><td>0</td><td>1</td><td>Free run: With original: One-sided mode: 32% speed</td></tr><tr><td>0</td><td>1</td><td>1</td><td>0</td><td>Free run: With original: Two-sided mode: 32% speed</td></tr><tr><td>0</td><td>1</td><td>1</td><td>1</td><td>Free run: With original: One-sided mode: 70% speed</td></tr><tr><td>1</td><td>0</td><td>0</td><td>0</td><td>Free run: With original: Two-sided mode: 70% speed</td></tr><tr><td>1</td><td>0</td><td>0</td><td>1</td><td>Free run: With original: One-sided mode: 200% speed</td></tr><tr><td>1</td><td>0</td><td>1</td><td>0</td><td>Free run: With original: Two-sided mode: 200% speed</td></tr><tr><td>1</td><td>0</td><td>1</td><td>1</td><td>Transport Motor On</td></tr><tr><td>1</td><td>1</td><td>0</td><td>0</td><td>Feed Motor On</td></tr><tr><td>1</td><td>1</td><td>0</td><td>1</td><td>Transport Motor On with random mode</td></tr><tr><td>1</td><td>1</td><td>1</td><td>0</td><td>Feed Motor On with random mode</td></tr><tr><td>1</td><td>1</td><td>1</td><td>1</td><td></td></tr></table><h3>D386/D634</h3><h3>BRIDGE UNIT BU3030/BU3060</h3> <table style='width: 100%'><tr><td>R EVI SIO N HIS TORY</td><td></td><td></td></tr><tr><td>Page</td><td>Date</td><td>Added/ Updated/ New</td></tr><tr><td></td><td></td><td>None</td></tr></table><h3>BRIDGE UNIT BU3030/BU3060 (D386/D634)</h3><h3>TABLE OF CONTENTS</h3> <ol> <li data-xf-list-type="ol"> <h4>REPLACEMENT AND ADJUSTMENT 1</h4> <ol> <li data-xf-list-type="ol">BRIDGE UNIT CONTROL BOARD 1</li> <li data-xf-list-type="ol">BRIDGE UNIT DRIVE MOTOR 2</li> <li data-xf-list-type="ol">TRAY EXIT SENSOR 3</li> <li data-xf-list-type="ol">RELAY SENSOR 4</li> </ol></li> <li data-xf-list-type="ol"> <h4>DETAILS 5</h4> <ol> <li data-xf-list-type="ol">MECHANICAL COMPONENT LAYOUT 5</li> <li data-xf-list-type="ol">DRIVE LAYOUT 6</li> <li data-xf-list-type="ol">ELECTRICAL COMPONENT LAYOUT 7</li> <li data-xf-list-type="ol">ELECTRICAL COMPONENT DESCRIPTION 8</li> <li data-xf-list-type="ol">JUNCTION GATE MECHANISM 9 <h3>READ THIS FIRST</h3> <h4>Safety and Symbols</h4> <h4>Replacement Procedure Safety</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_027.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ul> <li data-xf-list-type="ul">Turn off the main power switch and unplug the machine before beginning any of the replacement procedures in this manual.</li> </ul></li> </ol></li> </ol>When taking apart the bridge unit, first take the unit out of the copier. Symbols Used in this ManualThis manual uses the following symbols.: See or Refer to: Screws: Connector: Clip ring: E-ring<ol> <li data-xf-list-type="ol"> <h3>REPLACEMENT AND ADJUSTMENT</h3> <ol> <li data-xf-list-type="ol"> <h4>BRIDGE UNIT CONTROL BOARD</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_028.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Bridge unit ( "Installation Procedure" in the base copier manual)</li> <li data-xf-list-type="ol">Rear cover [A] ( x 2) Bridge Unit BU3030/ BU3060 (D386/D634) </li> <li data-xf-list-type="ol">Bridge unit control board ( x 3,  x 4) </li> </ol> [*] <h4>BRIDGE UNIT DRIVE MOTOR</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_029.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Bridge unit ( "Installation Procedure" in the base copier manual)</li> <li data-xf-list-type="ol">Rear cover ( "Bridge Unit Control Board")</li> <li data-xf-list-type="ol">Bracket [A] ( x 3,  x 2)</li> <li data-xf-list-type="ol">Bridge unit drive motor ( x 4,  x 1) </li> </ol> [*] <h4>TRAY EXIT SENSOR</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_030.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Bridge unit ( "Installation Procedure" in the base copier manual)</li> <li data-xf-list-type="ol">Rear cover ( "Bridge Unit Control Board")</li> <li data-xf-list-type="ol">Paper tray [A]</li> <li data-xf-list-type="ol">Exit guide ( x 1) <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_031.jpg" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Bridge Unit BU3030/ BU3060 (D386/D634) [*]Tray exit sensor [C] ( x 1) </li> </ol> [*] <h4>RELAY SENSOR</h4> </li> </ol> </li> </ol><img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_032.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Bridge unit ( "Installation Procedure" in the base copier manual)</li> <li data-xf-list-type="ol">Paper tray [A]</li> <li data-xf-list-type="ol">Relay sensor ( x 1) </li> </ol><ol> <li data-xf-list-type="ol"> <h3>DETAILS</h3> Bridge Unit BU3030/ BU3060 (D386/D634) <ol> <li data-xf-list-type="ol">Relay Sensor</li> <li data-xf-list-type="ol">2nd Transport Roller</li> <li data-xf-list-type="ol">Left Exit Roller</li> <li data-xf-list-type="ol">Paper Tray </li> </ol><ol> <li data-xf-list-type="ol"> <h4>MECHANICAL COMPONENT LAYOUT</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_033.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Upper Exit Roller</li> <li data-xf-list-type="ol">Tray Exit Sensor</li> <li data-xf-list-type="ol">Junction Gate</li> <li data-xf-list-type="ol">1st Transport Roller </li> </ol></li> <li data-xf-list-type="ol"> <h4>DRIVE LAYOUT</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_034.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Left Exit Roller</li> <li data-xf-list-type="ol">2nd Transport Roller</li> <li data-xf-list-type="ol">1st Transport Roller</li> <li data-xf-list-type="ol">Upper Exit Roller</li> <li data-xf-list-type="ol">Bridge Unit Drive Motor</li> </ol></li> <li data-xf-list-type="ol"> <h4>ELECTRICAL COMPONENT LAYOUT</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_035.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Left Guide Switch</li> <li data-xf-list-type="ol">Right Guide Switch</li> <li data-xf-list-type="ol">Junction Gate Solenoid</li> <li data-xf-list-type="ol">Tray Exit Sensor</li> <li data-xf-list-type="ol">Bridge Unit Control Board</li> <li data-xf-list-type="ol">Bridge Unit Drive Motor Bridge Unit BU3030/ BU3060 (D386/D634) </li> <li data-xf-list-type="ol">Relay Sensor</li> </ol></li> <li data-xf-list-type="ol"> <h4>ELECTRICAL COMPONENT DESCRIPTION</h4> <table style='width: 100%'><tr><td>Symbol</td><td>Name</td><td>Function</td><td>Index No.</td></tr><tr><td>Motors</td><td></td><td></td><td></td></tr><tr><td>M1</td><td>Drive Motor</td><td>Drives the bridge unit.</td><td>6</td></tr><tr><td>Sensors</td><td></td><td></td><td></td></tr><tr><td>S1</td><td>Tray Exit</td><td>Checks for misfeeds.</td><td>4</td></tr><tr><td>S2</td><td>Relay</td><td>Checks for misfeeds.</td><td>7</td></tr><tr><td>Switches</td><td></td><td></td><td></td></tr><tr><td>SW2</td><td>Right Guide</td><td>Detects when the right guide is opened.</td><td>2</td></tr><tr><td>SW3</td><td>Left Guide</td><td>Detects when the left guide is opened.</td><td>1</td></tr><tr><td>Solenoids</td><td></td><td></td><td></td></tr><tr><td> SOL1</td><td> Junction Gate</td><td>Moves the junction gate to direct the paper to the upper tray (on top of the bridge unit) or to the finisher.</td><td> 3</td></tr><tr><td>PCBs</td><td></td><td></td><td></td></tr><tr><td> PCB1</td><td>Bridge Unit Control Board</td><td> Controls the bridge unit.</td><td> 5</td></tr></table> </li> <li data-xf-list-type="ol"> <h4>JUNCTION GATE MECHANISM</h4> </li> </ol></li> </ol><img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_036.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />The junction gate [A] directs any paper reaching the bridge unit to either the upper tray (on top of the bridge unit) or to the finisher, depending on which has been selected.Bridge Unit BU3030/ BU3060 (D386/D634)If the junction gate solenoid has been activated, the junction gate [A] points downward and directs the paper to the upper tray (dotted line path in illustration). When the solenoid is off, the junction gate points upward and the paper is fed out to the finisher [C] by the transport and left exit rollers (solid line). <table style='width: 100%'><tr><td>R EVI SIO N HIS TORY</td><td></td><td></td></tr><tr><td>Page</td><td>Date</td><td>Added/ Updated/ New</td></tr><tr><td></td><td></td><td>None</td></tr></table><h3>PB3110(D537)/PB3130(D580) PAPER FEED UNIT</h3><h3>PAPER FEED UNIT (D537/D580)</h3><h3>TABLE OF CONTENTS</h3> <ol> <li data-xf-list-type="ol"> <h4>REPLACEMENT AND ADJUSTMENT 1</h4> <ol> <li data-xf-list-type="ol">EXTERIOR COVER 1<ol> <li data-xf-list-type="ol">REAR COVER 1</li> </ol></li> <li data-xf-list-type="ol">ELECTRICAL COMPONENTS 2<ol> <li data-xf-list-type="ol">LIFT MOTORS 2</li> <li data-xf-list-type="ol">UPPER AND LOWER PAPER FEED CLUTCHES 3</li> <li data-xf-list-type="ol">PAPER FEED MOTOR 4</li> <li data-xf-list-type="ol">MAIN BOARD 4</li> </ol></li> <li data-xf-list-type="ol">FEED 5<ol> <li data-xf-list-type="ol">PAPER FEED UNIT 5</li> <li data-xf-list-type="ol">PICK-UP, PAPER FEED AND SEPARATION ROLLERS 6</li> <li data-xf-list-type="ol">LIFT, PAPER END, AND RELAY SENSORS 7</li> </ol></li> </ol></li> </ol><ol> <li data-xf-list-type="ol"> <h3>REPLACEMENT AND ADJUSTMENT</h3> <ol> <li data-xf-list-type="ol"> <h4>EXTERIOR COVER</h4> Paper Feed Unit PB3110/ PB3130 D537/D580 <ol> <li data-xf-list-type="ol"> <h4>REAR COVER</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_037.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Securing brackets [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_038.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1 each)</li> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_039.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2) </li> </ol> </li> </ol> [*] <h4>ELECTRICAL COMPONENTS</h4> <ol> <li data-xf-list-type="ol"> <h4>LIFT MOTORS</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_040.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_041.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Rear Cover")</li> <li data-xf-list-type="ol">Lift motors [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_042.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_043.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1 each) </li> </ol> Paper Feed Unit PB3110/ PB3130 D537/D580 [*] <h4>UPPER AND LOWER PAPER FEED CLUTCHES</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_044.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_045.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Rear Cover")</li> <li data-xf-list-type="ol">Upper paper feed gear unit [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_046.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 3, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_047.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> <li data-xf-list-type="ol">Upper paper feed clutch bracket <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_048.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_049.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 2, bushing x 1) [*]Upper paper feed clutch [C] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_050.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> [*]Lower paper feed clutch bracket [D] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_051.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, bushing x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_052.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 2) [*]Lower paper feed clutch [E] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_053.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) </li> </ol> [*] <h4>PAPER FEED MOTOR</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_054.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_055.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Rear Cover")</li> <li data-xf-list-type="ol">Paper feed motor [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_056.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_057.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 2) <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_058.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ul> <li data-xf-list-type="ul">When installing the paper feed motor, make sure that the gear of the paper feed motor holds the timing belt . </li> </ul> </li> </ol> [*] <h4>MAIN BOARD</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_059.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_060.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Rear Cover")</li> <li data-xf-list-type="ol">Main board [A] (All <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_061.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />s, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_062.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2, snap pin x 2)</li> </ol></li> </ol> [*] <h4>FEED</h4> Paper Feed Unit PB3110/ PB3130 D537/D580 <ol> <li data-xf-list-type="ol"> <h4>PAPER FEED UNIT</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_063.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Right cover [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_064.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2)</li> <li data-xf-list-type="ol">Vertical transport guide of the paper feed unit <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_065.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> [*]Pull the tray 3 (or 4). [*]Paper guide [C] [*]Paper feed unit [D] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_066.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_067.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_068.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2) When replacing the paper feed unit of tray 4, do the same. </li> </ol> [*] <h4>PICK-UP, PAPER FEED AND SEPARATION ROLLERS</h4> 1. Paper feed unit ( "Paper Feed Unit) <ol> <li data-xf-list-type="ol">Roller holder [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_069.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 1)</li> <li data-xf-list-type="ol">Pick-up roller [*]Paper feed roller [C] [*]Separation roller [D] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_070.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 1) </li> </ol> Paper Feed Unit PB3110/ PB3130 D537/D580 [*] <h4>LIFT, PAPER END, AND RELAY SENSORS</h4> </li> </ol> </li> </ol> </li> </ol><img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_071.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Paper feed unit <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_072.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Paper Feed Unit")</li> <li data-xf-list-type="ol">Vertical transport sensor bracket [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_073.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> <li data-xf-list-type="ol">Vertical transport sensor <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_074.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 1) [*]Paper feed sensor bracket [C] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_075.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) [*]Paper feed sensor [D] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_076.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) [*]Paper end sensor filler [E] [*]Paper end sensor [F] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_077.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) [*]Lift sensor [G] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_078.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) </li> </ol> <table style='width: 100%'><tr><td>R EVI SIO N HIS TORY</td><td></td><td></td></tr><tr><td>Page</td><td>Date</td><td>Added/ Updated/ New</td></tr><tr><td></td><td></td><td>None</td></tr></table><h3>PB3110(D538)/PB3140(D581) LARGE CAPACITY TRAY</h3><h3>LARGE CAPACITY TRAY (D538/D581)</h3><h3>TABLE OF CONTENTS</h3> <ol> <li data-xf-list-type="ol"> <h4>REPLACEMENT AND ADJUSTMENT 1</h4> <ol> <li data-xf-list-type="ol">EXTERIOR COVER 1<ol> <li data-xf-list-type="ol">LEFT AND RIGHT TRAY 1</li> <li data-xf-list-type="ol">CHANGING THE TRAY SIZE 2</li> </ol></li> <li data-xf-list-type="ol">ELECTRICAL COMPONENTS 3<ol> <li data-xf-list-type="ol">PAPER HEIGHT SENSORS ON PAPER STORAGE SIDE 3</li> <li data-xf-list-type="ol">END FENCE HP SENSOR/PAPER END SENSOR 2 3</li> <li data-xf-list-type="ol">TRAY LIFT MOTOR 4</li> <li data-xf-list-type="ol">TRAY MOTOR 5</li> <li data-xf-list-type="ol">MAIN BOARD 5</li> <li data-xf-list-type="ol">STACK TRANSPORT CLUTCH 6</li> </ol></li> <li data-xf-list-type="ol">FEED 7<ol> <li data-xf-list-type="ol">PAPER FEED UNIT 7</li> <li data-xf-list-type="ol">PICK-UP, FEED AND SEPARATION ROLLERS 8</li> <li data-xf-list-type="ol">PAPER FEED, PAPER END, LIFT AND RELAY SENSORS 9</li> </ol></li> </ol></li> </ol><ol> <li data-xf-list-type="ol"> <h3>REPLACEMENT AND ADJUSTMENT</h3> <ol> <li data-xf-list-type="ol"> <h4>EXTERIOR COVER</h4> <ol> <li data-xf-list-type="ol"> <h4>LEFT AND RIGHT TRAY</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_079.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Large Capacity Tray PB3110/ PB3140 D538/D581 <ol> <li data-xf-list-type="ol">Pull the LCT drawer. <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_080.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ul> <li data-xf-list-type="ul">If the right tray comes up with the left tray, push the right tray into the LCT.</li> </ul></li> <li data-xf-list-type="ol">Left tray [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_081.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2) <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_082.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /></li> <li data-xf-list-type="ol">Remove the right tray pressing down the stopper [C]. <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_083.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ul> <li data-xf-list-type="ul">When reinstalling the tray, set the tray on the guide rail and carefully push the tray in, making sure to keep the tray level.</li> </ul></li> </ol> [*] <h4>CHANGING THE TRAY SIZE</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_084.jpg" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Remove the fence screws <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_085.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 5).</li> <li data-xf-list-type="ol">Change the position of the fences. <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_086.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ul> <li data-xf-list-type="ul">Before fastening the screws, set paper in the tray.</li> </ul></li> </ol></li> </ol> [*] <h4>ELECTRICAL COMPONENTS</h4> <ol> <li data-xf-list-type="ol"> <h4>PAPER HEIGHT SENSORS ON PAPER STORAGE SIDE</h4> 1. Tray ( "Left and Right Tray") Large Capacity Tray PB3110/ PB3140 D538/D581 </li> </ol></li> </ol> [*]Rear fence [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_087.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) [*]Rear fence bracket <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_088.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2) [*]Paper height sensors [C] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_089.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1 each) <ol> <li data-xf-list-type="ol"><ol> <li data-xf-list-type="ol"> <h4>END FENCE HP SENSOR/PAPER END SENSOR 2</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_090.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ol> <li data-xf-list-type="ol">Bottom cover [D] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_091.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> <li data-xf-list-type="ol">End fence HP sensor [E] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_092.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> <li data-xf-list-type="ol">Paper end sensor 2 (paper storage side) [F] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_093.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> </ol></li> <li data-xf-list-type="ol"> <h4>TRAY LIFT MOTOR</h4> 1. Securing brackets [A] ( x 1 each) <ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_094.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2) <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_095.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> [*]Tray lift motor [C] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_096.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_097.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 3) </li> </ol> [*] <h4>TRAY MOTOR</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_098.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Large Capacity Tray PB3110/ PB3140 D538/D581 <ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_099.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Tray Lift Motor")</li> <li data-xf-list-type="ol">Tray motor [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_100.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_101.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2) <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_102.png" alt="image" class="fr-fic fr-dii fr-draggable " style="" /><ul> <li data-xf-list-type="ul">When installing the tray motor, make sure that the gear of the tray motor holds the timing belt . </li> </ul> </li> </ol> [*] <h4>MAIN BOARD</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_103.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_104.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Tray Lift Motor" )</li> <li data-xf-list-type="ol">Main board [A] (All <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_105.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />s, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_106.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 2, snap x 2)</li> </ol>[*] <h4>STACK TRANSPORT CLUTCH</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_107.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Rear cover <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_108.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Tray Lift Motor")</li> <li data-xf-list-type="ol">Stack transport clutch [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_109.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_110.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> </ol></li> </ol> [*] <h4>FEED</h4> <ol> <li data-xf-list-type="ol"> <h4>PAPER FEED UNIT</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_111.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> Large Capacity Tray PB3110/ PB3140 D538/D581 <ol> <li data-xf-list-type="ol">Right cover [A]</li> <li data-xf-list-type="ol">Open the vertical guide plate [*]Guide plate [C] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_112.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> [*]Pull the LCT drawer [D]. [*]Paper feed unit [E] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_113.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_114.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) </li> </ol> [*] <h4>PICK-UP, FEED AND SEPARATION ROLLERS</h4> <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_115.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> <ol> <li data-xf-list-type="ol">Paper feed unit <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_116.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Paper Feed Unit")</li> <li data-xf-list-type="ol">Separation roller [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_117.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> <li data-xf-list-type="ol">Roller holder <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_118.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1) [*]Feed roller [C] and pick-up roller [D] </li> </ol> [*] <h4>PAPER FEED, PAPER END, LIFT AND RELAY SENSORS</h4> </li> </ol> </li> </ol> </li> </ol><img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_119.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" />Large Capacity Tray PB3110/ PB3140 D538/D581<ol> <li data-xf-list-type="ol">Paper feed unit <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_120.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> "Paper Feed Unit")</li> <li data-xf-list-type="ol">Vertical transport sensor bracket [A] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_121.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_122.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1)</li> <li data-xf-list-type="ol">Relay sensor [*]Paper feed sensor bracket [C] [*]Paper feed sensor [D] [*]Paper end feeler [E] [*]Paper end sensor holder [F] (hook x 3) [*]Paper end sensor [G] <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_123.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, hook x 3) [*]Lift sensor <img src="https://todaynetnews.com/uploads/ricoh/ricoh-mp-4002-5002-service-manual/part20/Image_124.gif" alt="image" class="fr-fic fr-dii fr-draggable " style="" /> x 1, hook x 3) </li> </ol></blockquote>

Name

Verification