Forums
New posts
Search forums
What's new
New posts
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Photocopier and Printer
Ricoh
How to fix error SC 541, SC 542 on Ricoh copier
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="John" data-source="post: 447" data-attributes="member: 2"><p><strong>Genuine Ricoh photocopiers after a period of use will also display error 541 Ricoh machine, error 542 Ricoh machine. So when encountering the above errors, what should you do to handle the above problem?</strong></p><p></p><p>[ATTACH=full]53[/ATTACH]</p><p></p><p><strong>Concept and features of Ricoh machines</strong></p><p>Error SC 541, SC 542 Ricoh machines are mainly caused by a problem with the machine's Thermistor roller or the heating rollers in the center not working.</p><p></p><p><strong>Error SC 541, SC 542 on Ricoh machines and how to fix it</strong></p><p>Below, we will learn about the causes and how to fix the SC 541 error on Ricoh machines and SC 542 error on Ricoh machines to get the machine back to normal operation:</p><p></p><p><strong>Error SC 541 on Ricoh machines</strong></p><p>Error 541 on Ricoh machines is mainly due to the following reasons:</p><p></p><p><strong>The resistor is dusty or dirty</strong></p><p>Thermistor is dead or weak</p><p>Check the power source to see if it is weak</p><p>The printer is not set correctly with the type of paper used</p><p>The parameters on the printer are not set correctly</p><p>How to fix error 541 on Ricoh machines:</p><p></p><p><strong>First, you clear the error for the machine according to the instructions:</strong></p><p></p><p>Step 1: Press the yellow Clear mode button, then press the number "1 0 7" on the keyboard and hold the red Stop clear button to open the SP mode interface.</p><p>Step 2: Press SP copy displayed on the screen. Continue pressing the number sequence “5810#” → press Execer —> turn off the machine for 10 seconds and restart to clear the error.</p><p></p><p>If the error is still not cleared, continue to perform the following operations: Remove the dryer assembly and measure the circuits, check if the fuse is broken or not, check if the sensor is damaged or not. If so, you should replace those parts, after replacing, remember to perform the error clearing operation above again so that the machine can operate normally again.</p><p></p><p><strong>SC 542 Error on Ricoh Machine</strong></p><p>When encountering error 542 on Ricoh machine, it may be due to the cause of damage due to the drying part having problems while waiting for drying:</p><p></p><p>[ATTACH=full]54[/ATTACH]</p><p></p><p>Thermistor is faulty</p><p>Bearing is broken or the Drying Roller bearing is broken</p><p>The drying part of the machine has a problem or error</p><p>The Drum is short circuited</p><p>Fuse fuse error</p><p>How to fix:</p><p></p><p>If the screen displays error 542 on Ricoh machine, you need to perform some error clearing operations for the machine. If after clearing the error is not successful, you need to fix the error as follows:</p><p>Check the Thermistor, check the bearing, Drying Roller bearing and replace it if the part is damaged</p><p>Check if the drying part, drying bulb is faulty or not, if so, replace the new Sensor</p><p>Check the Drum frame wire bundle for short circuit or not</p><p>Check if the fuse fuse is broken or not and replace it.</p></blockquote><p></p>
[QUOTE="John, post: 447, member: 2"] [B]Genuine Ricoh photocopiers after a period of use will also display error 541 Ricoh machine, error 542 Ricoh machine. So when encountering the above errors, what should you do to handle the above problem?[/B] [ATTACH type="full"]53[/ATTACH] [B]Concept and features of Ricoh machines[/B] Error SC 541, SC 542 Ricoh machines are mainly caused by a problem with the machine's Thermistor roller or the heating rollers in the center not working. [B]Error SC 541, SC 542 on Ricoh machines and how to fix it[/B] Below, we will learn about the causes and how to fix the SC 541 error on Ricoh machines and SC 542 error on Ricoh machines to get the machine back to normal operation: [B]Error SC 541 on Ricoh machines[/B] Error 541 on Ricoh machines is mainly due to the following reasons: [B]The resistor is dusty or dirty[/B] Thermistor is dead or weak Check the power source to see if it is weak The printer is not set correctly with the type of paper used The parameters on the printer are not set correctly How to fix error 541 on Ricoh machines: [B]First, you clear the error for the machine according to the instructions:[/B] Step 1: Press the yellow Clear mode button, then press the number "1 0 7" on the keyboard and hold the red Stop clear button to open the SP mode interface. Step 2: Press SP copy displayed on the screen. Continue pressing the number sequence “5810#” → press Execer —> turn off the machine for 10 seconds and restart to clear the error. If the error is still not cleared, continue to perform the following operations: Remove the dryer assembly and measure the circuits, check if the fuse is broken or not, check if the sensor is damaged or not. If so, you should replace those parts, after replacing, remember to perform the error clearing operation above again so that the machine can operate normally again. [B]SC 542 Error on Ricoh Machine[/B] When encountering error 542 on Ricoh machine, it may be due to the cause of damage due to the drying part having problems while waiting for drying: [ATTACH type="full"]54[/ATTACH] Thermistor is faulty Bearing is broken or the Drying Roller bearing is broken The drying part of the machine has a problem or error The Drum is short circuited Fuse fuse error How to fix: If the screen displays error 542 on Ricoh machine, you need to perform some error clearing operations for the machine. If after clearing the error is not successful, you need to fix the error as follows: Check the Thermistor, check the bearing, Drying Roller bearing and replace it if the part is damaged Check if the drying part, drying bulb is faulty or not, if so, replace the new Sensor Check the Drum frame wire bundle for short circuit or not Check if the fuse fuse is broken or not and replace it. [/QUOTE]
Name
Verification
Post reply
Photocopier and Printer
Ricoh
How to fix error SC 541, SC 542 on Ricoh copier
Top
