HOME PAGE | < Previous | Contents | Next >
11. Attach the fax key decal [A] to the third key top from bottom.
12. Attach the serial number decal under the copier serial number decal on the rear cover of the machine.
13. Attach the FCC decal on the rear cover of the machine (NA only).
14. Put the power plug into the outlet and turn on the main power of the machine.
Make sure that the outlet is grounded.
"SRAM formatted" shows on the operation panel after you have turned the main switch on. Turn the main switch off and on again for normal use.
15. Make sure that the date and time are correctly set.
1.2.3 FAX ICON ADDITION
This procedure allows the fax icon to appear on the home screen of the operation panel.
1. Press [User Tools].
2. Press [Edit Home].
3. Press [Add Icon].
4. Press [Fax].
5. Press a [Blank] to set a location for the fax icon.
6. Press [Exit] to end the fax icon addition.