HOME PAGE | < Previous | Contents | Next >

Preventive Maintenance‌‌‌‌


2. APPENDICES: PREVENTIVE MAINTENANCE TABLES

Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

2.1 PREVENTIVE MAINTENANCE


2.1.1 PREVENTIVE MAINTENANCE ITEMS

Preventive Maintenance Items


Yield Parts

The parts mentioned in these tables have a target yield. However, the total copy/print volume made by the machine will not reach the target yield within the machine's targeted lifetime if the machine is used under the target usage conditions (ACV, color ratio, P/J, and C/O). So, these parts are categorized not as PM parts but as yield parts (EM parts). The parts with “(R)” in this table are yield parts.

Chart: A4 (LT)/5%

Mode: 4 copies / original (prints/job) Ratio 30%

Environment: Normal temperature and humidity

Yield may change depending on circumstances and print conditions. Symbol keys: C: Clean, R: Replace, L: Lubricant, I: Inspect


Mainframe


Item

60K

120K

300K

400K

600K

EM

Remarks

Scanner

Reflector



C




Optics cloth

1st mirror



C




Optics cloth

2nd mirror



C




Optics cloth

3rd mirror



C




Optics cloth

Exposure Glass




C




C

Exposure glass cleaner

Preventive Maintenance


Item

60K

120K

300K

400K

600K

EM

Remarks

Guide Rail(Both sides 2 steps)




C





Dry cloth

ADF Exposure Glass




C




C

Exposure glass cleaner

PCU

PCU(K)




R





PCU(C,M,Y)







Logging counts to replace: 270K


Waste Toner Bottle







Upper limit counts to replace: 100K

*Replace when full of waste toner bottle detected.

Development Unit (K)






R




Development Unit (C,M,Y)







Logging counts to replace: 270K

Transfer

ITB Cleaning Unit




R





ITB unit





R



Paper transfer roller unit





R




Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

Preventive Maintenance



Item

60K

120K

300K

400K

600K

EM

Remarks

Fusing

Fusing sleeve belt unit





R




Entrance guide plate







C

Clean deposit toner

Exit guide plate







C

Clean deposit toner

Separation Plate







C

Clean deposit toner

Pressure Roller





R




Bearing: Fusing Roller





R



Lubricating grease

Thermopile




C


C

Dry cloth


Gears







C

Replace if it worn out


idler gear







C

Replace if it worn out

Miscellaneous

Exhaust Filter



R






Dust Glass







C

Exposure glass cleaner

TM/P sensor






C


Preventive Maintenance



Item

60K

120K

300K

400K

600K

EM

Remarks

Paper Feed (Mainframe)

Registration Roller







C


Damp cloth


Registration Sensor







C

Remove toner and paper dust, Dry cloth

Paper powder removal container







C

Remove toner and paper dust, Dry cloth

Transport roller







C


Damp cloth


Transfer Sensor







C

Remove toner and paper dust, Dry cloth


paper feed sensor







C

Remove toner and paper dust, Dry cloth


Feed roller







C

Remove toner and paper dust, Dry cloth


Separation Roller







C

Remove toner and paper dust, Dry cloth


Pick-up roller







C

Remove toner and paper dust, Dry cloth

Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

Preventive Maintenance



Item

60K

120K

300K

400K

600K

EM

Remarks

Paper Feed (Paper Trays)

Transport roller







C


Damp cloth


Transfer Sensor







C

Remove toner and paper dust, Dry cloth


paper feed sensor







C

Remove toner and paper dust, Dry cloth


Feed roller







C

Remove toner and paper dust, Dry cloth


Separation Roller







C

Remove toner and paper dust, Dry cloth


Pick-up roller







C

Remove toner and paper dust, Dry cloth

Preventive Maintenance



Item

60K

120K

300K

400K

600K

EM

Remarks

Duplex

Duplex transport roller







C


Damp cloth


Duplex inlet sensor







C

Remove toner and paper dust, Dry cloth


Duplex outlet sensor







C

Remove toner and paper dust, Dry cloth

Duplex outlet roller







C


Damp cloth

Duplex inlet roller







C


Damp cloth

By-pass paper feed roller







C


Damp cloth

By-pass Separation Roller







C


Damp cloth

By-pass

pick-up roller







C


Damp cloth

By-pass transport roller







C


Damp cloth

Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

Appendices: Preventive Maintenance Tables

Preventive Maintenance



Item

60K

120K

300K

400K

600K

EM

Remarks

Paper Exit

Inverter Roller






C

Damp cloth


Inverter Sensor







C

Remove toner and paper dust, Dry cloth

Paper eject roller







C


Damp cloth


Paper eject sensor







C

Remove toner and paper dust, Dry cloth


 

PREVENTIVE MAINTENANCE ITEMSYield PartsMainframe

  

 

HOME PAGE |

< Previous | Contents | Next >