HOME PAGE | < Previous | Contents | Next >
4.1 TEST PATTERN PRINTING
Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used primarily for design testing.
Do not operate the machine until the test pattern is printed out completely. Otherwise, SC will occur.
1. Enter the SP mode then select SP2-109-003.
2. Select test pattern for print from the list then press [OK].
Test PATTERN
Printing
Test PATTERN
Printing
Test PATTERN
Printing
3. When selecting color for Printing; Full Color or either CMYK, go to SP2-109-005 (1: Full Color, 2: Cyan, 3: Magenta, 4: Yellow, 5: Black) to select.
4. When changing density of test pattern, select density with SP2-109-006 through 009 for each color.
If select "0" with SP2-109-006 through 009, the color adjusted so will not show up in the test pattern.
5. To Print, Touch "Copy Window", then set settings within the following window for test print (paper size etc…).
When using black and white printing, touch "Black & White" on the LCD. When using color printing, touch "Full Color" on the LCD.
6. Press "Start" key to start test print.
7. After checking test pattern, touch "SP Mode" on the LCD to return to SP mode display.
8. Reset all settings to default values.
9. Exit SP mode.
Test Pattern Printing
No. | Pattern | No. | Pattern |
0 | Copy image | 14 | Trimmed area |
1 | V 1dot | 15 | V Grid 1 |
2 | V 2dot | 16 | V Grid 2 |
3 | H 1dot | 17 | H Belt |
4 | H 2dot | 18 | H Belt |
5 | Grid V line | 19 | Checker flag |
6 | Grid H line | 20 | Gray V |
7 | Grid: Small | 21 | Gray H |
8 | Grid: Large | 22 | 4800dpi step pattern 1(1dot) |
9 | S Grid: Small | 23 | 4800dpi step pattern 1(2dot) |
10 | S Grid:Large | 24 | 4800dpi step pattern 2(1dot) |
11 | 1dot independent | 25 | 4800dpi step pattern 2(2dot) |
12 | 2dot independent | 26 | Full side colored |
13 | 4dot independent | 27 | Full side White |
RE V IS ION H IST ORY | ||
Page | Date | Added/ Updated/ New |
None | ||