5803

[INPUT Check]

5-803-001

Registration Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on register sensor position. (0: paper exist, 1: paper non exist)

5-803-002

Paper Feed Sensor 1

This setting is not available for MP C2004/MP C2504.

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on 1st paper feed sensor position. (0: paper exist, 1: paper non exist)

5-803-003

Transport Sensor 1

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on 1st carry sensor position. (0: paper exist, 1: paper non exist)

5-803-004

Paper Feed Sensor 2

This setting is not available for MP C2004/MP C2504.

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on 2nd paper feed sensor position. (0: paper exist, 1: paper non exist)

5-803-005

Transport Sensor 2

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on 2nd carry sensor position. (0: paper exist, 1: paper non exist)

5-803-006

Fusing Entrance Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on fusing entrance sensor position. (0: paper exist, 1: paper non exist)

5-803-007

Fusing Exit Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on fusing exit sensor position. (0: paper exist, 1: paper non exist)

5-803-008

Paper Exit Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on paper exit sensor position. (0: paper exist, 1: paper non exist)

5-803-009

Inverter Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on reverse sensor position. (0: paper exist, 1: paper non exist)

5-803-010

Duplex Exit Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on duplex exit sensor position. (0: paper exist, 1: paper non exist)

5-803-011

Duplex Entrance Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on duplex entrance sensor position. (0: paper exist, 1: paper non exist)

5-803-012

Tray Full Exit Sensor

This setting is not available for MP C2004/MP C2504.

ENG

[0 or 1 / 0 / 1/step]

0: Not full

1: full

Detects paper full of main unit paper exit tray. (0: Not full, 1: full)

5-803-013

Tray 1: Paper Height Sensor

ENG

[0 to 3 / 0 / 1/step] When full is 100%, 11: 71 to 100%

01: 31 to 70%

00: 11 to 30%

10: 1 to 10%

Detects remaining paper amount of 1st paper feed tray. (When full is 100%,

11: 71 to 100%, 01: 31 to 70%, 00: 11 to 30%, 10: 1 to 10%)

*Check SP5-803-015 for paper end.

5-803-014

Tray 1: Upper Limit Sensor

ENG

[0 or 1 / 0 / 1/step] 0: less then limit 1: high then limit

Detects the height of paper loaded in 1st paper feed tray. (0: less then limit, 1: high then limit)

* As long as you do not press the white bar of the machine side in the tray back, not output.

5-803-015

Tray 1: Paper End Detection

ENG

[0 or 1 / 0 / 1/step]

0: No paper

1: paper remaining

Detects paper is running out on 1st paper feed tray. (0: No paper, 1: paper remaining)

5-803-016

Tray 1: Set Sensor

ENG

[0 or 1 / 0 / 1/step]

0: set 1:not set

Detects that 1st paper feed tray is set to main unit. (0: set, 1:not set)

5-803-017

Tray 2: Paper Height Sensor

ENG

[0 to 3 / 0 / 1/step] When full is 100%, 11: 71 to 100%

01: 31 to 70%

00: 11 to 30%

10: 1 to 10%

Detects remaining paper amount of 2nd paper feed tray. (When full is 100%,

11: 71 to 100%, 01: 31 to 70%, 00: 11 to 30%, 10: 1 to 10%)

*Check SP5-803-019 for paper end.

5-803-018

Tray 2: Paper End Sensor

ENG

[0 or 1 / 0 / 1/step] 0: less then limit 1: high then limit

Detects the height of paper loaded in 2nd paper feed tray. (0: less then limit, 1: high then limit)

* As long as you do not press the white bar of the machine side in the tray back, not output.

5-803-019

Tray 2: Paper End Detection

ENG

[0 or 1 / 0 / 1/step]

0: No paper

1: paper remaining

Detects paper running out of 2nd paper feed tray. (0: No paper, 1: paper remaining)

5-803-020

Tray 2: Set Sensor

ENG

[0 or 1 / 0 / 1/step]

0: set

1: not set

Detects that 2nd paper feed tray is set to main unit. (0: set, 1:not set)

5-803-021

Tray 2: Size Sensor

ENG

[0 to 15 / 0 / 1/step]

Value changes depending on paper size (fence position) set to 2nd paper feed tray.

5-803-022

By-pass: Paper End Sensor

ENG

[0 or 1 / 0 / 1/step]

0: No paper

1: paper remaining

Detects paper is running out on bypass tray. (0: No paper, 1: paper remaining)

5-803-023

By-pass: Main Scan Length Sensor

ENG

[0 to 31 / 0 / 1/step]

Value changes depending on main scan direction of paper set to bypass tray.

5-803-024

By-pass: Sub Scan Length Sensor

ENG

[0 or 1 / 0 / 1/step]

Value changes depending on sub scan direction of paper set to bypass tray.

5-803-025

Interlock Release Detection

ENG

[0 to 1 / 0 / 1/step]

00: Unlocked

11: Locked

Detects open/close of interlock switch (front cover/right cover). (00: Unlocked, 11: Locked)

5-803-026

Right Door Open/Close Sensor

ENG

[0 or 1 / 0 / 1/step]

0: close

1: open

Detects right door status. (0: close, 1: open)

5-803-027

Duplex Guide Plate Open/Close Sensor

ENG

[0 or 1 / 0 / 1/step]

0: close

1: open

Detects duplex guide plate status. (0: close, 1: open)

5-803-028

PTR Open/Close Sensor

ENG

[0 or 1 / 0 / 1/step]

0: open

1: close

Detects paper transfer unit status. (0: open, 1: close)

5-803-029

ITB Contact Sensor

ENG

[0 or 1 / 0 / 1/step]

0: Abutting

1: Alienate

Detects image transfer roller (Y, M, and C) and photoreceptors distance. (0: Abutting, 1: Alienate)

5-803-030

PTR Contact Sensor

ENG

[0 or 1 / 0 / 1/step]

0: Abutting

1: Alienate

Detects image transfer belt and paper transfer rollers distance. (0: Abutting, 1: Alienate)

5-803-031

New ITB Unit Detection

ENG

[0 or 1 / 0 / 1/step]

Not available with C1

5-803-032

Toner Collection Full Sensor

ENG

[0 or 1 / 0 / 1/step]

0: Not full

1: full

Detects full of waste toner bottle. (0: Not full, 1: full)

5-803-033

Toner Collection Bottle Set Sensor

ENG

[0 or 1 / 0 / 1/step]

0: set

1: not set

Detects that waste toner bottle is set to main unit. (0: set, 1:not set)

5-803-034

Toner End Sensor:Y

ENG

[0 or 1 / 0 / 1/step]

0: End

1: Not End

Detects remaining toner amount.

*Power with SP5-804-173 before checking. (0: End, 1: Not End)

5-803-035

Toner End Sensor:M

ENG

[0 or 1 / 0 / 1/step]

0: End

1: Not End

Detects remaining toner amount.

*Power with SP5-804-173 before checking. (0: End, 1: Not End)

5-803-036

Toner End Sensor:C

ENG

[0 or 1 / 0 / 1/step]

0: End

1: Not End

Detects remaining toner amount.

*Power with SP5-804-173 before checking. (0: End, 1: Not End)

5-803-037

Toner End Sensor:K

ENG

[0 or 1 / 0 / 1/step]

0: End

1: Not End

Detects remaining toner amount.

*Power with SP5-804-172 before checking. (0: End, 1: Not End)

5-803-038

Fusing:Area Detection

ENG

[0 to 15 / 0 / 1/step] 01:200V system 10:100V System 00, 01:unit set error

Detects region of fusing unit.

(0111: 200V system, 1011: 100V System)

5-803-039

Fusing:New Unit Detection

ENG

[0 or 1 / 0 / 1/step]

0: New

1: Old

Detects New/Old of fusing unit. (0: New, 1: Old)

5-803-040

Fusing Temp Detect

ENG

[0 or 1 / 0 / 1/step]

0: Normal

1: High temperature

Detects whether high temperature is detected from fusing unit. (0: Normal, 1: High temperature)

5-803-041

NC Sensor Temp Detection/ 2

ENG

[0 or 1 / 0 / 1/step]

0: Normal

1: High temperature

Detects whether high temperature is detected from fusing unit. (0: Normal, 1: High temperature)

5-803-042

NC Sensor Temp Detection/ 1

ENG

[0 or 1 / 0 / 1/step]

0: Normal

1: High temperature

Detects whether high temperature is detected from fusing unit. (0: Normal, 1: High temperature)

5-803-047

Nip Pres. Release Home Position Sensor

ENG

[0 or 1 / 0 / 1/step]

0: Pressured

1: Not pressured

Detects state of fusing nip pressure. (0: Pressured , 1: Not pressured)

5-803-048

Fusing Fan: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of fusing exhaust heat fan. (0: Running, 1: Stopped, or locked)

5-803-049

Dev Fan: Right: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of developer air intake fan (right). (0: Running, 1: Stopped, or locked)

5-803-051

PSU Cooling Fan: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of PSU cooling fan. (0: Running, 1: Stopped, or locked)

5-803-052

Ozone Fan: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of ozone exhaust air fan. (0: Running, 1: Stopped, or locked)

5-803-054

PSU Fan: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of PSU exhaust heat fan. (0: Running, 1: Stopped, or locked)

5-803-055

PCB Box Cooling Fan: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of electric box cooling fan. (0: Running, 1: Stopped, or locked)

5-803-058

Paper Exit Cooling Fan: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of paper exit cooling fan. (0: Running, 1: Stopped, or locked)

5-803-060

Toner Supply Cooling Fan: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Running

1: Stopped, or locked

Detects locking of toner supply cooling fan. (0: Running, 1: Stopped, or locked)

5-803-063

Development Motor FC: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Stopped, or locked 1: Running

Detects locking of developer motor (FC). (0: Running, 1: Stopped, or locked)

5-803-064

Drum Motor FC: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Stopped, or locked 1: Running

Detects locking of drum motor (FC). (0: Running, 1: Stopped, or locked)

5-803-065

Fusing Motor: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Stopped, or locked 1: Running

Detects locking of fusing motor.

(0: Running, 1: Stopped, or locked)

5-803-066

Transfer Drum Motor K: Lock

ENG

[0 or 1 / 0 / 1/step]

0: Stopped, or locked 1: Running

Detects locking of transfer drum motor K. (0: Running, 1: Stopped, or locked)

5-803-068

PP:CB:SC Detection

ENG

[0 or 1 / 0 / 1/step]

0: SC detected

1: Normal

Detects SC of HVP (electrify/develop). (0: SC detected, 1: Normal)

5-803-069

PP:TTS:SC Detection

ENG

[0 or 1 / 0 / 1/step]

0: SC detected

1: Normal

Detects SC of HVP (transfer). (0: SC detected, 1: Normal)

5-803-072

Key Counter: Set 1

ENG

[0 or 1 / 0 / 1/step]

0: set 1:unset

Detects setting of key counter. (0: set, 1:unset)

(key counter: set 1=0, 2=1 for set, others for unset)

5-803-073

Key Counter: Set 2

ENG

[0 or 1 / 0 / 1/step]

0: unset 1:set

Detects setting of key counter. (0: unset, 1:set)

(key counter: set 1=0, 2=1 for set, others for unset)

5-803-074

Key Card Set

ENG

[0 or 1 / 0 / 1/step]

0: set

1: not set

Detects that key card is set to main unit. (0: set, 1:not set)

5-803-075

1 Bin Tray: Paper Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Detects that paper is left upon the tray. (0: paper exist, 1: paper non exist)

5-803-076

1 Bin Tray: Set Detection System

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Detects that tray is set to main unit. (0: set, 1:not set)

5-803-077

Bridge Relay Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper exist

1: paper non exist

Responds to paper existence on carry sensor position or bridge unit. (0: paper exist, 1: paper non exist)

5-803-078

Bridge Exit Sensor

ENG

[0 or 1 / 0 / 1/step]

0: Paper exist

1: Paper do not exist

Responds to paper existence on paper exit sensor position or bridge unit. (0: paper exist, 1: paper non exist)

5-803-079

Bridge Set Detection System

ENG

[0 or 1 / 0 / 1/step]

10: set 11:not set

Detects that bridge unit is set to main unit. (10: set, 11:not set)

5-803-082

Bridge Relay/Left Exit Cover Sensor

ENG

[0 or 1 / 0 / 1/step]

0: close

1: open

Detects open/close of the left carry cover open/close sensor (left paper exit tray) and the relay carry cover open/close sensor (bridge unit).

(0: close, 1: open)

5-803-083

Bridge Exit/Upper Exit Cover Sensor

ENG

[0 or 1 / 0 / 1/step]

0: close

1: open

Detects open/close of the upper carry cover open/close sensor (left paper exit tray) and the relay paper exit cover open/close sensor (bridge unit). (0: close, 1: open)

5-803-084

Shift Tray: Set Detection System

ENG

[0 or 1 / 0 / 1/step]

01: set 11:not set

Detects that shift tray is set to main unit. (01: set, 11:not set)

5-803-085

Shift Tray: Position Sensor 1

ENG

[0 or 1 / 0 / 1/step]

0: Stop on this side. during moving towards inner

1: Stop on inner side. during moving towards this side

Detects shift tray position.

(0: Stop on this side. during moving towards inner,

1: Stop on inner side. during moving towards this side)

5-803-086

Shift Tray: Position Sensor 2

ENG

[0 or 1 / 0 / 1/step]

*It is a backup sensor with this machine, so "1" is always displayed)

5-803-094

GAVD Open/Close Detection

ENG

[0 or 1 / 0 / 1/step]

For checking door open/close during process. No need to operate.

5-803-095

Bridge 24V Fuse Detection

ENG

[0 or 1 / 0 / 1/step]

0: Not cut

1: Cut

Detects state of 24V fuse on the bridge unit. (0: Not cut, 1: Cut)

5-803-096

Bridge 5V Fuse Detection

ENG

[0 or 1 / 0 / 1/step]

0: Not cut

1: Cut

Detects state of 5V fuse on the bridge unit. (0: Not cut, 1: Cut)

5-803-200

HP Sensor

ENG

[0 or 1 / 0 / 1/step]

Tests the scanner HP sensor.

5-803-201

Platen Cover Sensor

ENG

[0 or 1 / 0 / 1/step]

Tests the book open/close sensor.

5803

[INPUT Check]

Gets information of specified sensor.

5-803-211

Bank: Tray3: Feed Sensor

ENG

[0 or 1 / 0 / 1/step]

0: paper not detected 1: paper detected.

5-803-212

Bank: Tray4: Feed Sensor

ENG

5-803-213

Bank: Tray5: Feed Sensor

ENG

5-803-214

Bank: Tray3: Transport Sensor

ENG

5-803-215

Bank: Tray4: Transport Sensor

ENG

5-803-216

Bank: Tray5: Transport Sensor

ENG