HOME PAGE | < Previous | Contents | Next >
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
3.8 ENGINE SP TABLES - SP6000
3.8.1 SP6-XXX (PERIPHERALS)
6006 | [ADF Adjustment] | ||
6-006-001 | Side-to-Side Regist: Front | *ENG | [-3.0 to 3.0 / 0 / 0.1mm/step] |
6-006-002 | Side-to-Side Regist: Rear | *ENG | [-3.0 to 3.0 / 0 / 0.1mm/step] |
6-006-003 | Leading Edge Registration: Front | *ENG | [-5.0 to 5.0 / 0 / 0.1mm/step] |
6-006-004 | Leading Edge Registration: Rear | *ENG | [-5.0 to 5.0 / 0 / 0.1mm/step] |
6-006-005 | Buckle: Duplex Front | *ENG | [-5.0 to 5.0 / 0 / 0.1mm/step] |
6-006-006 | Buckle: Duplex Rear | *ENG | [-5.0 to 5.0 / 0 / 0.1mm/step] |
6-006-007 | Rear Edge Erase Front | *ENG | [-10.0 to 10.0 / -2.3 / 0.1mm/step] |
6-006-008 | Rear Edge Erase Rear | *ENG | [-10.0 to 10.0 / -2.3 / 0.1mm/step] |
6-006-010 | L-Edge Regist (1-Pass): Front | *ENG | [-5.0 to 5.0 / 0 / 0.1mm/step] |
6-006-011 | L-Edge Regist (1-Pass): Rear | *ENG | [-5.0 to 5.0 / 0 / 0.1mm/step] |
6-006-012 | 1st Buckle (1-Pass) | *ENG | [-3.0 to 3.0 / 0 / 0.1mm/step] |
6-006-013 | 2nd Buckle (1-Pass) | *ENG | [-2.0 to 3.0 / 0 / 0.1mm/step] |
6-006-014 | T-Edge Erase (1-Pass): Front | *ENG | [-5.0 to 5.0 / -3.0 / 0.1mm/step] |
6-006-015 | T-Edge Erase (1-Pass): Rear | *ENG | [-5.0 to 5.0 / -2.5 / 0.1mm/step] |
6007 | [ADF INPUT Check] |
See page 3-385 "Input Check Table" |
Engine SP Tables - SP6000
6008 | [ADF OUTPUT Check] |
See page 3-412 "Output Check Table" |
6009 | [ADF FreeRun] | ||
6-009-001 | Free Run Simplex Motion | ENG | [0 or 1 / 0 / 1/step] |
6-009-002 | Free Run Duplex Motion | ENG | [0 or 1 / 0 / 1/step] |
6-009-003 | Free Run Stamp Motion | ENG | [0 or 1 / 0 / 1/step] |
6-009-004 | Free Run Simplex Motion(low speed) | ENG | [0 or 1 / 0 / 1/step] |
6-009-005 | Free Run Simplex Motion(high speed) | ENG | [0 or 1 / 0 / 1/step] |
6-009-006 | Free Run Duplex Motion(low speed) | ENG | [0 or 1 / 0 / 1/step] |
6-009-007 | Free Run Duplex Motion(high speed) | ENG | [0 or 1 / 0 / 1/step] |
6010 | [Stamp Position Adj.] | ||
6-010-001 | - | *ENG | [-5.0 to 5.0 / 0 / 0.1mm/step] |
6011 | [1-Pass ADF INPUT Check] |
See page 3-385 "Input Check Table" |
6012 | [1-Pass ADF OUTPUT Check] |
See page 3-412 "Output Check Table" |
6016 | [Original Size Detect Setting] | ||
6-016-001 | - | *ENG | [0 to 255 / 0 / 1/step] |
6017 | [DF Magnification Adj.] |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
6-017-001 | - | *ENG | [-5 to 5 / 0 / 0.1%/step] |
6-017-001 | - | *ENG | [-5 to 5 / 0 / 0.1%/step] |
6-017-001 | - | *ENG | [-5 to 5 / 0 / 0.1%/step] |
6020 | [Skew Correction Moving Setting] | ||
6-020-001 | - | *ENG | [0 or 1 / 0 / 1/step] |
6020 | [Skew Correction Moving Setting] | ||
6-020-001 | - | *ENG | [0 or 1 / 0 / 1/step] |
6020 | [Skew Correction Moving Setting] | ||
6-020-001 | - | *ENG | [0 or 1 / 0 / 1/step] |
Engine SP Tables - SP6000
6121 | [NV Adj. Data Mod.] | ||
6-121-001 | Jogger Pos. Factory Adj. | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-121-002 | Folding Pos. Factory Adj. | ENG | [-1.4 to 1.4 / 0 / 0.2mm/step] |
6125 | [Use Paper Guide(Big Size)] | ||
6-125-001 | All Size | ENG | [0 or 1 / 0 / 1/step] |
6126 | [Use Paper Guide(Small Size)] | ||
6-126-001 | All Size | ENG | [0 or 1 / 0 / 1/step] |
6130 | [Sub-scan PunchPosAdj:FrontFIN] | ||
6-130-001 | Domestic 2Hole(Europe 2Hole) | ENG | [-7.5 to 7.5 / 0 / 0.5mm/step] |
6-130-002 | North America 3Hole | ENG | |
6-130-003 | Europe 4Hole | ENG | |
6-130-004 | North Europe 4Hole | ENG | |
6-130-005 | North America 2Hole | ENG | |
6131 | [Main-scan PunchPosAdj:FrontFIN] | ||
6-131-001 | Domestic 2Hole(Europe 2Hole) | ENG | [-2 to 2 / 0 / 0.4mm/step] |
6-131-002 | North America 3Hole | ENG | |
6-131-003 | Europe 4Hole | ENG | |
Engine SP Tables - SP6000
6-131-004 | North Europe 4Hole | ENG | |
6-131-005 | North America 2Hole | ENG |
6132 | [Jogger Fence Fine Adj:FrontFIN] | ||
6-132-001 | A3T | ENG | [-1.5 to 1.5 / 0 / 0.5mm/step] |
6-132-002 | B4T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-003 | A4T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-004 | A4Y | ENG | [-1.5 to 1.5 / 0 / 0.5mm/step] |
6-132-005 | B5T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-006 | B5Y | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-007 | DLT-T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-008 | LG-T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-009 | Oficio-T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-010 | LT-T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-011 | LT-Y | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-012 | 8K-T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-013 | 16K-T | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-014 | 16K-Y | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6-132-015 | Other | ENG | [-3 to 3 / 0 / 0.5mm/step] |
6133 | [Staple Position Adj: FrontFIN] | ||
6-133-001 | Finisher1 | ENG | [-2 to 2 / 0 / 0.5mm/step] |
6134 | [Finisher Free Run: FrontFIN] | ||
6-134-001 | Free Run1 | ENG | [0 or 1 / 0 / 1/step] |
6-134-002 | Free Run2 | ENG | [0 or 1 / 0 / 1/step] |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
6-134-003 | Free Run3 | ENG | [0 or 1 / 0 / 1/step] |
6-134-004 | Free Run4 | ENG | [0 or 1 / 0 / 1/step] |
6-134-003 | Free Run3 | ENG | [0 or 1 / 0 / 1/step] |
6-134-004 | Free Run4 | ENG | [0 or 1 / 0 / 1/step] |
6-134-003 | Free Run3 | ENG | [0 or 1 / 0 / 1/step] |
6-134-004 | Free Run4 | ENG | [0 or 1 / 0 / 1/step] |
6135 | [INPUT Check: FrontFIN] |
See page 3-385 "Input Check Table" |
6135 | [INPUT Check: FrontFIN] |
See page 3-385 "Input Check Table" |
6135 | [INPUT Check: FrontFIN] |
See page 3-385 "Input Check Table" |
Engine SP Tables - SP6000
6136 | [OUTPUT Check: FrontFIN] |
See page 3-412 "Output Check Table" |
6140 | [Staple Position Adj: 1K FIN] | ||
6-140-001 | - | ENG | [-3.5 to 3.5 / 0 / 0.5mm/step] |
6-140-002 | - | ENG | [-3 to 3 / 0 / 0.3mm/step] |
6141 | [Booklet Stapler Pos Adj:1K FIN] | ||
6-141-001 | A3 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-002 | B4 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-003 | A4 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-004 | B5 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-005 | DLT SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-006 | LG SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-007 | Oficio SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-008 | LT SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-141-009 | 12"x18" | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6142 | [Sub-scan Punch Pos Adj:1K FIN] | ||
6-142-001 | JPN/EU: 2-Hole | ENG | [-7.5 to 7.5 / 0 / 0.5mm/step] |
6-142-002 | NA: 3-Hole | ENG | |
Engine SP Tables - SP6000
6-142-003 | Europe: 4-Hole | ENG | |
6-142-004 | NEU: 4-Hole | ENG | |
6-142-005 | NA: 2-Hole | ENG |
6143 | [Jogger Pos Adj:1K FIN] | ||
6-143-001 | A3 SEF | ENG | [-1.5 to 1.5 / 0 / 0.5mm/step] |
6-143-002 | B4 SEF | ENG | |
6-143-003 | A4 SEF | ENG | |
6-143-004 | A4 LEF | ENG | |
6-143-005 | B5 SEF | ENG | |
6-143-006 | B5 LEF | ENG | [-1.5 to 1.5 / 0 / 0.5mm/step] |
6-143-007 | DLT SEF | ENG | |
6-143-008 | LG SEF | ENG | |
6-143-009 | Oficio SEF | ENG | |
6-143-010 | LT SEF | ENG | |
6-143-011 | LT LEF | ENG | |
6-143-012 | 12"x18" | ENG | |
6-143-013 | 8K SEF | ENG | [-1.5 to 1.5 / 0 / 0.5mm/step] |
6-143-014 | 16K SEF | ENG | |
6-143-015 | 16K LEF | ENG | |
6-143-016 | Other | ENG | |
6144 | [Main-scan Punch Pos Adj:1K FIN] | ||
6-144-001 | JPN/EU: 2-Hole | ENG | [-2 to 2 / 0 / 0.4mm/step] |
6-144-002 | NA: 3-Hole | ENG | |
6-144-003 | Europe: 4-Hole | ENG | |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
6-144-004 | NEU: 4-Hole | ENG | |
6-144-005 | NA: 2-Hole | ENG |
6-144-004 | NEU: 4-Hole | ENG | |
6-144-005 | NA: 2-Hole | ENG |
6-144-004 | NEU: 4-Hole | ENG | |
6-144-005 | NA: 2-Hole | ENG |
6145 | [Skew Correct Buckle Adj:1K FIN] | ||
6-145-001 | A3 SEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-002 | B4 SEF | ENG | |
6-145-003 | A4 SEF | ENG | |
6-145-004 | A4 LEF | ENG | |
6-145-005 | B5 SEF | ENG | |
6-145-006 | B5 LEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-007 | A5 LEF | ENG | |
6-145-008 | DLT SEF | ENG | |
6-145-009 | LG SEF | ENG | |
6-145-010 | Oficio SEF | ENG | |
6-145-011 | LT SEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-012 | LT LEF | ENG | |
6-145-013 | HLT LEF | ENG | |
6-145-014 | 12"x18" | ENG | |
6-145-015 | 8K SEF | ENG | |
6-145-016 | 16K SEF | ENG | |
6-145-017 | 16K LEF | ENG | |
6-145-018 | Other | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6145 | [Skew Correct Buckle Adj:1K FIN] | ||
6-145-001 | A3 SEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-002 | B4 SEF | ENG | |
6-145-003 | A4 SEF | ENG | |
6-145-004 | A4 LEF | ENG | |
6-145-005 | B5 SEF | ENG | |
6-145-006 | B5 LEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-007 | A5 LEF | ENG | |
6-145-008 | DLT SEF | ENG | |
6-145-009 | LG SEF | ENG | |
6-145-010 | Oficio SEF | ENG | |
6-145-011 | LT SEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-012 | LT LEF | ENG | |
6-145-013 | HLT LEF | ENG | |
6-145-014 | 12"x18" | ENG | |
6-145-015 | 8K SEF | ENG | |
6-145-016 | 16K SEF | ENG | |
6-145-017 | 16K LEF | ENG | |
6-145-018 | Other | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6145 | [Skew Correct Buckle Adj:1K FIN] | ||
6-145-001 | A3 SEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-002 | B4 SEF | ENG | |
6-145-003 | A4 SEF | ENG | |
6-145-004 | A4 LEF | ENG | |
6-145-005 | B5 SEF | ENG | |
6-145-006 | B5 LEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-007 | A5 LEF | ENG | |
6-145-008 | DLT SEF | ENG | |
6-145-009 | LG SEF | ENG | |
6-145-010 | Oficio SEF | ENG | |
6-145-011 | LT SEF | ENG | [-5 to 5 / 0 / 0.2mm/step] |
6-145-012 | LT LEF | ENG | |
6-145-013 | HLT LEF | ENG | |
6-145-014 | 12"x18" | ENG | |
6-145-015 | 8K SEF | ENG | |
6-145-016 | 16K SEF | ENG | |
6-145-017 | 16K LEF | ENG | |
6-145-018 | Other | ENG | [-5 to 5 / 0 / 0.2mm/step] |
Engine SP Tables - SP6000
6146 | [Skew Correct Ctrl SW:1K FIN] | ||
6-146-001 | A3 SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
Engine SP Tables - SP6000
6-146-002 | B4 SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-003 | A4 SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-004 | A4 LEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-005 | B5 SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-006 | B5 LEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-007 | A5 LEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-008 | DLT SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-009 | LG SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-010 | Oficio SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-011 | LT SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-012 | LT LEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Tables - SP6000
6-146-013 | HLT LEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-014 | 12"x18" | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-015 | 8K SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-016 | 16K SEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-017 | 16K LEF | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6-146-018 | Other | ENG | [0 or 1 / 0 / 1/step] 0: enable 1: disable |
6147 | [Booklet Folder Pos Adj:1K FIN] | ||
6-147-001 | A3 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-002 | B4 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-003 | A4 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-004 | B5 SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-005 | DLT SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-006 | LG SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-007 | Oficio SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-008 | LT SEF | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-009 | 12"x18" | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-010 | A3 SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
Engine SP Tables - SP6000
6-147-011 | A3 SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-012 | A3 SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-013 | B4 SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-014 | B4 SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-015 | B4 SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-016 | A4 SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-017 | A4 SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-018 | A4 SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-019 | B5 SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-020 | B5 SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-021 | B5 SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-022 | DLT SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-023 | DLT SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-024 | DLT SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-025 | LG SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-026 | LG SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-027 | LG SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-028 | Oficio SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-029 | Oficio SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-030 | Oficio SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-031 | LT SEF(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-032 | LT SEF(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-033 | LT SEF(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-034 | 12"x18"(1-5) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-035 | 12"x18"(6-10) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
6-147-036 | 12"x18"(11-over) | ENG | [-3 to 3 / 0 / 0.2mm/step] |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
6148 | [Fold Times Adj: 1K FIN] | ||
6-148-001 | - | ENG | [0 to 29 / 0 / 1sec/step] |
6148 | [Fold Times Adj: 1K FIN] | ||
6-148-001 | - | ENG | [0 to 29 / 0 / 1sec/step] |
6148 | [Fold Times Adj: 1K FIN] | ||
6-148-001 | - | ENG | [0 to 29 / 0 / 1sec/step] |
6149 | [Last Paper Pos Time Adj:1K FIN] | ||
6-149-001 | - | *ENG | [0 to 1 / 0 / 1time/step] |
6149 | [Last Paper Pos Time Adj:1K FIN] | ||
6-149-001 | - | *ENG | [0 to 1 / 0 / 1time/step] |
6149 | [Last Paper Pos Time Adj:1K FIN] | ||
6-149-001 | - | *ENG | [0 to 1 / 0 / 1time/step] |
Engine SP Tables - SP6000
6150 | [PositioningStrtTimingAdj:1KFIN] | ||
6-150-001 | A3 SEF | ENG | [-100 to 100 / 0 / 10msec/step] |
6-150-002 | B4 SEF | ENG | |
6-150-003 | A4 SEF | ENG | |
6-150-004 | A4 LEF | ENG | |
6-150-005 | B5 SEF | ENG | |
6-150-006 | B5 LEF | ENG | |
6-150-007 | DLT SEF | ENG | |
6-150-008 | LG SEF | ENG | |
6-150-009 | Oficio SEF | ENG | |
6-150-010 | LT SEF | ENG | |
6-150-011 | LT LEF | ENG | |
6-150-012 | 12"x18" | ENG | |
6-150-013 | 8K SEF | ENG | |
6-150-014 | 16K SEF | ENG | |
6-150-015 | 16K LEF | ENG | |
6-150-016 | Other | ENG | |
6151 | [PosTimeAdj(LstPr2ndTime):1KFIN] | ||
6-151-001 | - | ENG | [-100 to 100 / 0 / 10msec/step] |
Engine SP Tables - SP6000
6152 | [PosTiAdj(ExcLstPr3rdTi):1KFIN] | ||
6-152-001 | A3 SEF | ENG | [-100 to 100 / 0 / 10msec/step] |
6-152-002 | B4 SEF | ENG | |
6-152-003 | A4 SEF | ENG | |
6-152-004 | A4 LEF | ENG | |
6-152-005 | B5 SEF | ENG | |
6-152-006 | B5 LEF | ENG | |
6-152-007 | DLT SEF | ENG | |
6-152-008 | LG SEF | ENG | |
6-152-009 | Oficio SEF | ENG | |
6-152-010 | LT SEF | ENG | |
6-152-011 | LT LEF | ENG | |
6-152-012 | 12"x18" | ENG | |
6-152-013 | 8K SEF | ENG | |
6-152-014 | 16K SEF | ENG | |
6-152-015 | 16K LEF | ENG | |
6-152-016 | Other | ENG | |
6154 | [Pos Time Adj By Sheet: 1K FIN] | ||
6-154-001 | 1 - 10 Sheets | ENG | [-100 to 100 / 0 / 10msec/step] |
6-154-002 | 11 - 20 Sheets | ENG | |
6-154-003 | 21 - 30 Sheets | ENG | |
6-154-004 | 31 - 40 Sheets | ENG | |
6-154-005 | 41 - 50 Sheets | ENG | |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
6155 | [Paper Guide Poss Adj: 1K FIN] | ||
6-155-001 | - | ENG | [-10 to 10 / 0 / 1mm/step] |
6155 | [Paper Guide Poss Adj: 1K FIN] | ||
6-155-001 | - | ENG | [-10 to 10 / 0 / 1mm/step] |
6155 | [Paper Guide Poss Adj: 1K FIN] | ||
6-155-001 | - | ENG | [-10 to 10 / 0 / 1mm/step] |
6156 | [Paper Guide Retra Adj: 1K FIN] | ||
6-156-001 | - | ENG | [-50 to 50 / 0 / 5mm/step] |
6156 | [Paper Guide Retra Adj: 1K FIN] | ||
6-156-001 | - | ENG | [-50 to 50 / 0 / 5mm/step] |
6156 | [Paper Guide Retra Adj: 1K FIN] | ||
6-156-001 | - | ENG | [-50 to 50 / 0 / 5mm/step] |
Engine SP Tables - SP6000
6157 | [Paper Guide Acept Adj: 1K FIN] | ||
6-157-001 | - | ENG | [-50 to 50 / 0 / 5msec/step] |
6160 | [Finisher Free Run: 1K FIN] | ||
6-160-001 | Free Run 1 | ENG | [0 or 1 / 0 / 1/step] |
6-160-002 | Free Run 2 | ENG | [0 or 1 / 0 / 1/step] |
6-160-003 | Free Run 3 | ENG | [0 or 1 / 0 / 1/step] |
6-160-004 | Free Run 4 | ENG | [0 or 1 / 0 / 1/step] |
6161 | [FIN (1K FIN) INPUT Check] |
See page 3-385 "Input Check Table" |
6162 | [FIN (1K FIN) OUTPUT Check] |
See page 3-412 "Output Check Table" |
6163 | [Use Paper Guide] | ||
6-163-001 | Big Size | ENG | [0 or 1 / 1 / 1/step] |
6-163-002 | Small Size | ENG | [0 or 1 / 0 / 1/step] |
6164 | [NV Adj. Data Mod. 1KShtFIN] | ||
6-164-001 | Jogger Pos. Factory Adj. | ENG | [-1.5 to 1.5 / 0 / 0.5mm/step] |
6-164-002 | Stapling Pos. Factory Adj. | ENG | [-2 to 2 / 0 / 0.5mm/step] |
Engine SP Tables - SP6000
6164 | [NV Adj. Data Mod. 1KShtFIN HY] | ||
6-164-003 | Stapling Pos. Factory Adj. (HY) | ENG | [-2.1 to 2.1 / 0 / 0.3mm/step] |
6-164-004 | Stapleless Stapling Pos. Factory Adj. | ENG | [-2.1 to 2.1 / 0 / 0.3mm/step] |
6164 | [NV Adj. Data Mod. 1KShtFIN] | ||
6-164-005 | Folding Pos. Factory Adj. | ENG | [-2 to 2 / 0 / 0.1mm/step] |
6180 | [M-ScanBindPosAdj:NoStplBindFIN] | ||
6-180-001 | - | ENG | [-1 to 1 / 0 / 0.5mm/step] |
6181 | [BindSpeedSetting:NoStplBindFIN] | ||
6-181-001 | - | ENG | [1 to 3 / 3 / 2/step] |
6182 | [ExitSpeedSwitch:NoStplBindFIN] | ||
6-182-001 | PaperLength:297.0-457.2mm,Thick(106-300g/m2) | ENG | [1 to 5 / 2 / 1/step] |
6-182-002 | PaperLength:297.0-457.2mm,Plain(60-105g/m2) | ENG | [1 to 5 / 2 / 1/step] |
6-182-003 | PaperLength:297.0-457.2mm,Thin(52-59g/m2) | ENG | [1 to 5 / 4 / 1/step] |
6-182-004 | PaperLength:210.0-296.9mm,Thick(106-300g/m2) | ENG | [1 to 5 / 2 / 1/step] |
6-182-005 | PaperLength:210.0-296.9mm,Plain(60-105g/m2) | ENG | [1 to 5 / 2 / 1/step] |
6-182-006 | PaperLength:210.0-296.9mm,Thin(52-59g/m2) | ENG | [1 to 5 / 4 / 1/step] |
6-182-007 | PaperLength:148.0-209.9mm,Thick(106-300g/m2) | ENG | [1 to 5 / 2 / 1/step] |
6-182-008 | PaperLength:148.0-209.9mm,Plain(60-105g/m2) | ENG | [1 to 5 / 2 / 1/step] |
6-182-009 | PaperLength:148.0-209.9mm,Thin(52-59g/m2) | ENG | [1 to 5 / 4 / 1/step] |
6183 | [FinisherFreeRun:NoStplBindFIN] | ||
6-183-001 | Free Run 1 | ENG | [0 or 1 / 0 / 0/step] |
Engine SP Mode Tables
Engine SP Mode Tables
Engine SP Mode Tables
6-183-002 | Free Run 2 | ENG | [0 or 1 / 0 / 0/step] |
6-183-003 | Free Run 3 | ENG | [0 or 1 / 0 / 0/step] |
6-183-002 | Free Run 2 | ENG | [0 or 1 / 0 / 0/step] |
6-183-003 | Free Run 3 | ENG | [0 or 1 / 0 / 0/step] |
6-183-002 | Free Run 2 | ENG | [0 or 1 / 0 / 0/step] |
6-183-003 | Free Run 3 | ENG | [0 or 1 / 0 / 0/step] |
6184 | [Input Check:NoStplBindFIN] |
See page 3-385 "Input Check Table" |
6184 | [Input Check:NoStplBindFIN] |
See page 3-385 "Input Check Table" |
6184 | [Input Check:NoStplBindFIN] |
See page 3-385 "Input Check Table" |
Engine SP Tables - SP6000
6185 | [Output Check:NoStplBindFIN] |
See page 3-412 "Output Check Table" |
6186 | [BindTimes NoStplBindFIN] | ||
6-186-001 | - | *ENG | [1 to 2 / 2 / 1/step] |
6801 | [1-pass Stamp Unit] | ||
6-801-001 | - | *ENG | [0 or 1 / 0 / 1/step] 0: NO 1: YES |
6900 | [ADF Bottom Plate Setting] | ||
6-900-001 | - | *ENG | [0 or 1 / 0 / 1/step] |
6901 | [ADF Operation Setting] | ||
Setting to give priority to stackability. | |||
6-901-001 | - | ENG | [0 or 1 / 0 / 1/step] 0: Higher quietness 1: Higher throughput |
6-901-002 | - | ENG | [0 or 1 / 0 / 1/step] 0: Normal 1: Higher stackability |