HOME PAGE | < Previous | Contents | Next >
Device state for each Energy Saving state
State | Energy Saving LED | Operation panel LCD | Engine (Printer/Scanner) | HDD | CTL |
Standby/Printing | ON | ON | ON | ON | ON |
Printing state/Panel OFF | ON | OFF | ON (Only scanner is in Quiet state) | ON | ON |
fusing OFF | ON | ON | ON (Both printer/scanner are in Quiet state) | ON | ON |
Quiet state | ON | OFF ON*1 | ON (Both printer/scanner are in Quiet state) | ON | ON |
Engine OFF | Blinking gradually ON*1 | Sleep OFF or ON*1 | OFF | OFF ON*1 | ON |
STR state | Blinking gradually | Sleep | OFF | OFF | STR |
Pre-recovery | ON | OFF ON*1 | OFF | ON | ON |
Energy Save
Detailed Descriptions
Detailed Descriptions
Detailed Descriptions
*1 When [Energy Saving Recvry. for Business Applicatn.] is [On (Energy Saving)], ON/OFF is determined by the internal timer of the Smart Operation Panel.
Transition of operation panel to Energy Saving when [Energy Saving Recvry. for Business Applicatn.] is [On (Energy Saving)]
Normally, the Energy Saving state of the operation panel LCD changes in step with the energy saving state of the MFP/LP main unit, but to support the scenario where an application that does not use the engine (printer/scanner) is executed from the operation panel, the Energy Saving state of the operation panel is transitioned through the three states ON, OFF, and Sleep with its internal timer when [Energy Saving Recvry. for Business Applicatn.] is [On (Energy Saving)].