HOME PAGE | < Previous | Contents | Next >
Detailed Descriptions
Detailed Descriptions
Detailed Descriptions
7.12 FUSING
7.12.1 OVERVIEW
This machine employs a QSU fusing system wherein a lamp emits light to heat a sleeve belt.
No. | Description | No. | Description |
1 | Fusing sleeve thermostats | 8 | Fusing junction gate |
2 | Non-contact thermistor | 9 | Fusing exit roller (drive) |
3 | Thermopile | 10 | Pressure roller drive cam |
4 | Fusing sleeve belt | 11 | Pressure roller |
5 | Stripper Plate | 12 | Pressure roller thermistors: Center, Edge, and Full-bleed edge |
6 | Fusing exit guide plate | 13 | Fusing entrance guide plate |
7 | Fusing exit roller (driven) |
Fusing
No. | Description | No. | Description |
1 | Thermopile (edge) | 6 | Non-contact thermistor (center) |
2 | Thermopile (center) | 7 | Pressure roller thermistor (center) |
3 | Fusing lamp | 8 | Non-contact thermistor (edge) |
4 | Fusing sleeve thermostat (edge) | 9 | Pressure roller thermistor (edge) |
5 | Fusing sleeve thermostat (center) | 10 | Pressure roller thermistor (Full-bleed edge) |