HOME PAGE | < Previous | Contents | Next >
2.8.2 INSTALLATION PROCEDURE
When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.
1. Install the stepped screws 
× 2).
2. Install the feeler guide [A].
3. Install the platen cover [A].
Platen Cover PN2000 (D700)
Installation
Installation
Installation
4. Place the platen sheet [A] on the exposure glass.
5. Line up the rear left corner of the platen sheet flush against corner [B] on the exposure glass.
6. Close the platen cover.
7. Open the platen cover.
8. Press the surface of the platen sheet gently to fix it on the platen cover securely.