HOME PAGE | < Previous | Contents | Next >
Detailed Descriptions
Detailed Descriptions
Detailed Descriptions
Paper Support Guide
To prevent paper jam when the paper is delivered from the machine’s paper exit to the internal exit peripherals, attach the paper support guide [C] (supplied with the peripherals).
Removing Wrinkling in the Tray
When paper larger than A3 is set, wrinkles may appear at the end of the paper. As a countermeasure, the previous machine used an L-shaped sheet metal [B].
In this machine, the support components [A] and a decal are attached, which are also available to the end-user.
Paper Feed/ Transport Section
For small size paper, the side fences [B] are sufficient because the paper is light, but paper larger than A3 must be set at the position indicated by the decal.
Tray 2, Paper Feed Unit PB3220/PB3210 (D787), and Paper Feed Unit PB3150 (D694) are also changed from L-shaped sheet metal to support component.
Factory Default:
Tray 2: A3 (11 inches for NA only)
Optional Paper Tray: A3 for all regions