HOME PAGE | < Previous | Contents | Next >
Paper Feed/ Transport Section
Sensor Position
Distance units: mm
Md. | From | To | Distance |
1st tray paper feed | Transport roller 1 | Transport sensor 1 | 16.8 |
2nd tray paper feed | Transport roller 2 | Transport sensor 2 | 24.3 |
Transport sensor 2 | Transport sensor 1 | 88.7 | |
Registration | Registration sensor | Registration roller | 17.2 |
Paper exit | Paper exit sensor | Paper exit roller | 17.0 |
Two-way distribution | Reverse roller | Reverse sensor | 14.0 |
Duplex | Duplex entrance roller | Duplex entrance sensor | 25.0 |
Duplex exit roller | Duplex exit sensor | 15.0 | |
1-bin | Reverse sensor | 1-bin paper exit roller | - |
Paper Exit Driven Roller and Paper Support Guide
Paper Exit Driven Roller
The standard paper exit driven roller [B] is drum-shaped and improves the stacking performance of the main machine exit tray by adding stiffness to the paper. However, if the paper has too much stiffness, it may jam as it enters the optional paper path when the internal peripheral is connected. Therefore, a flat type driven roller [A] is used to reduce the stiffness when transporting the paper.
The following options use the flat type driven roller:
Internal Finisher SR3130
Bridge Unit BU3070
Internal Finisher SR3180
Side Tray Type M3