HOME PAGE | < Previous | Contents | Next >
Size | Knob | |||
4 | 3 | 2 | 1 | |
B5 landscape(Exe landscape) | 0 | 0 | 1 | 0 |
A5 landscape | 0 | 1 | 0 | 1 |
Detailed Descriptions
Detailed Descriptions
Detailed Descriptions
* "0" is switch ON (PUSH), "1" is switch OFF.
* The figures in parentheses are automatic paper size switch can be switched over in SP mode (for SP settings, see "SP mode (paper supply transport)": SP5-181-002 to 006).
* SRA3=320×450mm(12.6"×17.7")
* Exe LEF=10.5"×7.25"
* If a pattern other than the above is detected, a blank is displayed on the control panel.
Remaining Paper Detection
When the lift motor rotates, the remaining paper sensors 1, 2 [A] built into the motor switch ON (unblocked) or OFF (blocked). Paper remaining in the paper feed tray is detected by the combination of ON/OFF for the two sensors.
There are the following 4 remaining paper detection levels: