HOME PAGE | < Previous | Contents | Next >

Process Control‌

*1 Mode a: adjusted two times

*2 Mode b: adjusted once

Executing MUSIC Manually

To operate modes a, b, and c manually, use the following SPs.

 SP2-111-001 (Mode a)

 SP2-111-002 (Mode b)

 SP2-111-003 (Mode c)

Do this SP after the laser unit is changed.

 SP2-111-004 (Mode d)

Mode d is the same as doing mode c then mode a. Normally in the field, we should only use mode d.

 Color registration errors can be corrected only by the mode d when the error is large.

[Color Registration] in User Tools (SP2-111-004)

Correction with higher accuracy can be performed by contacting the image transfer roller and executing MUSIC in a condition that is almost the same as during actual printing. This process is called ‘contact MUSIC’.

Contact MUSIC can be done manually by executing HOME screen -> User Tools icon -> Machine Features -> Maintenance -> Color Registration (SP2-111-004).

When the Imageable Area Extension Unit is installed, the MUSIC sensor is in the printing area. Therefore, the image transfer roller cannot be contacted and execution of MUSIC becomes the same as the previous machine.

HOME PAGE |

< Previous | Contents | Next >