CONNECTING TO MAIN MACHINE TRAY Ricoh MP C2004 C2504 Service Manual

Installation

2.4.2 CONNECTING TO MAIN MACHINE TRAY

1. Remove the rear cover [A].

2. Remove the rear lower cover [A].

3. Attach PCB: DHB X 3).

Anti-Condensation Heater for Paper Feed Trays

4. Connect the two harnesses between "PCB: DHB" and "PSU".

 Red dashed circled cable is only white for NA, red for EU/AA.

5. Connect connector 1.

6. Connect connector 2 to the harness already attached.

7. Attach connector 3 for the optional paper bank.

Anti-Condensation Heater for Paper Feed Trays

Installation

 This cable is only white for NA/EU/AA.

8. Remove trays 1 and 2 from the machine.

9. Connect the connector of the heater to the main machine.