HOME PAGE | < Previous | Contents | Next >
Troubleshooting for Transport/Paper Feeding of the Machine
Solution:
Reconnect the connector.
Replace the sensor.
Replace the Imaging IOB.
Replace the harness.
Paper transfer unit open/close LED not lit and paper transfer unit open
Target Part/SP No.:PTR Open/Close Sensor / SP5-803-028 (PTR Open/Close Sensor)
Cause verification | Problem Judgement |
Execute an INPUT check with an object (e.g. paper) placed within the sensor detection range. | 1: Close |
Execute an INPUT check without an object (e.g. paper) placed within the sensor detection range. | 0: Open |
Solution:
Clean the sensor.
Reconnect the connector.
Replace the sensor.
Replace the Paper Transport IOB.
Replace the harness.
Paper transfer unit open/close LED not lit
Target Part/SP No.:Paper Transfer Unit Open/Close LED / SP5-804-206 (PTR Open/Close LED)
Cause verification | Problem Judgement |
Turn ON the paper transfer unit open/close LED with OUTPUT check | 1: Close |
Execute an OUTPUT check without an object (e.g. paper) placed within the sensor detection range. | 0: Open |
Solution:
Clean the LED.
Reconnect the connector.